704207
76
Zoom out
Zoom in
Previous page
1/77
Next page
80-0078-00-MO-RevD 2018-08-02 SunTech CT50 User Manual | 76
SpO
2
Replace Cable
The cable of the Masimo SpO
2
module must be changed.
SpO
2
Incompatible Cable
The cable of the Masimo SpO
2
module is incompatible.
SpO
2
Unrecognized Cable
The cable of the Masimo SpO
2
module can’t be recognized.
SpO
2
No Sensor
The sensor of the Masimo SpO
2
module can’t be detected.
SpO
2
Invalid Sensor
The sensor of the Masimo SpO
2
module is invalid.
SpO
2
Replace Sensor
The sensor of the Masimo SpO
2
module needs to be changed.
SpO
2
Calibrate Sensor
The Masimo SpO
2
module is calibrating.
SpO
2
Motion Interference
The patient’s finger is moving too much during SpO
2
measurement.
SpO
2
Low perfusion
The signal of the patient’s finger is too low during SpO
2
measurement.
NIBP Cuff Type Error
The cuff type is wrong.
NIBP Air Leak Or Loose Cuff
An internal valve, air hose, or the cuff is leaking air.
The cuff is not wrapped properly around the patient’s limb.
An adult cuff is used in neonate mode.
NIBP Air Pressure Error
The system can’t maintain a stable air pressure.
NIBP Weak Signal
The cuff is wrapped too loosely, leading to a low patient signal.
The pulse of the patient is very weak.
NIBP Range Exceeded
The NIBP value exceeds the measurement range (275mmHg).
NIBP Excessive Motion
The patient is moving too much.
The signal noise is too loud when use deflation to detect the
patient’s pulse pressure.
The patient’s pulse is random.
NIBP Overpressure Detected
There is too much cuff pressure. Pressure exceeds the set safe
range (adult mode is 325mmHgneonate mode is 165mmHg)
NIBP Signal Saturated
Too much patient movement has impacted the NIBP signal
amplifier.
NIBP Time Out
The time exceeds 120s in adult mode.
The time exceeds 90s in neonate mode.
TEMP No Probe
The fast temp probe is not connected.
TEMP too high/ too low
The temp value exceeds the measurement range
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SunTech CT 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SunTech CT 50 in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of SunTech CT 50

SunTech CT 50 User Manual - German - 85 pages

SunTech CT 50 User Manual - French - 86 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info