549825

Suntec Wellness Monsun Station 5000 Manual

4
Zoom out
Zoom in
Previous page
1/5
Next page
T/H set: Timer and Humidity Set
Ion: Switches negative ions on/off
THE UNIT (Fig. 3) LCD DISPLAY (Fig. 4)
1. Output Jets
2. Top water tank handle
3. 5L water tank
4. Digital display and control buttons
5. Water tank opening for filling
6. Ati-Microbial Filter
7. Water tank Lid and seal
8. Air Filter
9. Power cord
CO
NTROL PANEL
SPECIFICATIONSRE
MOTE CONTROL
Model: MONSUN STATION 5000
Power supply: AC230 50Hz
Energy Consumption: 35W/135W
Water tank capacity: 5L
Dimensions(LxWxH): 27x19.7x33.5 cm
Weight: 1.7kg
Wait a few seconds until the water tank lid starts to release water into the basin. You will hear a
bubbling
sound as the air enters the water tank. Plug the power cord into the electrical outlet (NEVER
SWITCH
ON THE HUMIDIFIER WITHOUT WATER IN THE BASIN).If the humidifier is switched off, the
power icon (#10) should now be red and the Relative Humidity will now be displayed.
Press the Power Button to activate the humidifier. The machine is now operating in manual mode.
It will release mist .
The Heating Button activates the warm mist feature and is shown on the LCD display (icon
#11). The water is heated in the basin just prior to misting. Please do not place your hand over
the jets when the warm mist function is activated.
The +/- Button changes the mist level (1, 2, 3). This change is displayed on the LCD screen
(#14).
The T/H Set Button sets the timer and Humidity . The timer function determines how many
hours the humidifier will operate. When you Press the button,it will show Timer 00:00, you can
set the timer simply by pressing +/- Button, it can be set from 1 hour to 12 hours. When the timer
is set, the length of time is displayed in the LCD display (#15). As time passes, when you press
T/H Set Button again, you can see the leaving time . When it goes to 00:00 and the machine
shuts off.
Pressing the T/H Set Button activates humidity automatic mode(when the LCD display starts to
blink the word @Auto 00 RH%@).You can select the desired humidity level by pressing +/-
Button repeatedly until the required humidity level is displayed (from 45% to 90% in increments of
5%). Once you select your desired humidity level, simply stop pressing the button and your
humidity level will be set. Wait another 5 seconds and the numeric value on the LCD display will
switch to the current humidity level as measured by the built-in Hygrostat.
When the humidity level in the room reaches the set humidity level, the machine will go into
automatic sleep state and stop producing mist. When the room=s actual humidity level drops
below your set humidity level, then the machine will start producing mist again.
10.Power on/off icon
11.warm mist on/off icon
12.Empty water tank
indicator icon
13. Negative Ions
14.Mist level
15. 1)Timer set
2)Shows values for
both the desired relative
humidity and the actual
relative humidity
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Suntec Wellness Monsun Station 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Suntec Wellness Monsun Station 5000 in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info