480578
2
Zoom out
Zoom in
Previous page
1/46
Next page
2
www.strongsat.com
Your set-top box has been manufactured to meet international safety
standards, but you must take care if you want to obtain the best results
and operate it safely.
It is important that you read this booklet completely, especially the
safety instructions below.
If you have any doubts about the installation,
operation or safety of your set-top box, please consult your dealer
.
WARNING!
Remember that contact with 230 V AC mains can be lethal
or can cause a severe electric shock. To avoid this risk:
Never remove the top cover from your set-top box.
There are no user-serviceable parts inside it, but there
are some high-voltage live parts.
Make sure that all electrical connections are properly
made.
Do not connect any of your equipment (set-top box,
TV, video recorder etc.) to the mains supply until you
have properly connected all the other leads.
Disconnect your set-top box from the mains supply
(by disconnecting its mains lead from the mains wall
socket) before you disconnect any other equipment
from its rear panel.
Never push anything into the holes, slots or other
openings of the set-top box case (except a smart card
into its correct slot).
CAUTION!
In order to ensure a free flow of air around the set-top box,
allow at least 5cm of space above and around the set-top box.
Never stand your set-top box on soft furnishings or carpets. Do
not cover any ventilation slots.
Do not place your set-top box in an unventilated cabinet or on
top of a unit which emits heat (e.g. a TV or VCR).
Do not place your set-top box in a cabinet with more than one
other piece of audio/video equipment, for example, VCR or
DVD.
Do not use or store your set-top box in hot, cold, damp or
dusty places.
Do not put anything on your set-top box which might drip or
spill into it. Never stand objects filled with liquids, such as vases,
on top of your set-top box.
Never place naked flame sources, such as lighted candles, on top
of your set-top box.
For your safety
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT6750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT6750 in the language / languages: English as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info