1. Use this installation if your Digital Terrestrial Receiver does not support an active antenna.
2. Connect the supplied power adaptor to the “DC IN” connector on the back of the antenna.
3. Proceed with positioning the antenna as described above in section A (points 3, 4, 5).
NOTE: The antenna will not function properly if the built-in amplier is not powered.
Therefore it is required to supply the antenna with power via the coaxial cable or via
an external adapter.
Extension of the coaxial cable:
In some cases you may need to extend the standard supplied coaxial cable, we advise you to only do so
if you cannot get optimal signal strength within the reach of the standard cable. If you are to extend the
coaxial cable, then please note following comments:
Use a good quality coaxial cable, 75 Ohm type only with proper shielding
Use well shielded connectors, your dealer can advise you on this.
Make sure that both inner cable and shielding are properly connected to the connectors to
assure active antenna power supply and to avoid short circuit in the cable.
If you extend the cable, please keep the cable as short as strictly needed. Extending the cable or using bad
quality cable will reduce the performance of your antenna.
Subject to alterations. In consequence of continuous research and development technical specications, design and appearance of products may change. All
product names are trademarks or registered trademarks of their respective owners.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Strong SRT ANT 12 ECO at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Strong SRT ANT 12 ECO in the language / languages: English as an attachment in your email.
The manual is 1,02 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
