480569
13
Zoom out
Zoom in
Previous page
1/15
Next page
PART 1 • English
10
Subtitle Specific:
Small: Displays the subtitle as small mode.
Normal: Displays the subtitle as normal mode.
Big: Displays the subtitle as big mode.
Subtitle BG:
White: Displays the subtitle in white background.
Transparent: Displays the subtitle in transparent background.
Grey: Displays the subtitle in grey background.
Yellow green: Displays the subtitle in yellow green background.
Subtitle Font Color:
Red: Displays subtitle in red font.
Blue: Displays subtitle in blue font.
Green: Displays subtitle in green font
Note STRONG cannot guarantee compatibility (operation and/or bus power) with all USB mass storage
devices and assumes no responsibility for any loss of data that may occur when connected to this unit.
n With large amounts of data, it may take longer for the system to read the contents of a USB device.
n Some USB devices may not be properly recognized. Even when they are in a supported format,
some files may not play or display depending on the content.
A.1 TROUBLESHOOTING
There may be various reasons for the abnormal operation of the receiver. Check the receiver according to the procedures
shown below. If the receiver does not work properly after checking it, please contact the dealer or the local Service
Hotline. Do NOT open the receiver cover. It may cause a dangerous situation and the warranty will get void.
Problem Possible cause What to do
Stand-by indicator
do not light up
Mains lead unplugged/multipoint connector
switched off
Front panel switch is in OFF position
Check mains lead /switch multipoint
connector on
Set front panel switch to ON position
No signal found Aerial is disconnected
Aerial is damaged/misaligned
Out of digital signal area
Active antenna requires to switch ON antenna
power/external feed
Check aerial lead
Check aerial
Check with dealer
Switch receiver’s Antenna Power ON/
connect external feed
No picture or sound
on TV
Input is not selected on your TV
TV or VCR are not connected to main
Bad cable connection
Switch to correct TV input
Check mains lead
Firmly plug in cables between receiver and TV
Scrambled channel
message
Channel is scrambled Select alternative channel
No response to
remote control
Receiver off
Handset not aimed correctly
IR sensor obstructed
Hand set batteries exhausted
Plug in and turn on plug
Aim handset at IR sensor
Check for obstructions
Replace handset batteries
Forgotten channel
lock code
Contact local Service Hotline or send email to
our Support via www.strong.tv
Forgotten menu
lock code
Contact local Service Hotline or send email to
our Support via www.strong.tv
After moving the
receiver to another
room you are
no longer able
to receive digital
reception
The aerial feed former new point may come
through a distribution system which may reduce
the digital signal now received by the box.
Try a direct feed from the antenna
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8100 in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info