568532
21
Zoom out
Zoom in
Previous page
1/23
Next page
18
PART 1 • English
8.0 TROUBLESHOOTING
There may be various reasons for abnormal operation of the receiver. Please check the receiver according
to the procedures shown below. If the receiver does not work properly after checking it, please contact
your local Serviceline or STRONG dealer. Alternatively you can send a support mail via our website: www.
strong.tv. NEVER open or disassemble your receiver. This may cause a dangerous situation and will void
the warranty.
Symptom Cause Remedy
The display on front
panel does not light
up.
The power cord is not plugged in. Check that the power cord is plugged
in to the wall outlet. Make sure power
switch on rear panel is in ON position.
Receiver switched to STBY and the
display function is switched OFF.
Check if receiver is in STBY and the
setting within the menu Setup>Time
Setting>Time Display is set to OFF
No picture or sound Wrong connection or setting of the
Audio/Video output of the receiver
to TV.
Connect the Audio/Video output of
the receiver to TV correctly and check
the adjusted settings in the menu
Setup> Output Options.
Audio muting. Press the MUTE button.
TV power off. Turn TV on.
No picture The receiver can’t receive the signal. Check the antenna cable, replace the
cable, or connect the cable to the
receiver tightly.
Incorrect values of some tuner
parameters.
Set the values of tuner parameters
correctly in menu Installation>
Satellite Settings.
Wrong direction of the dish. Check the signal strength with a
spectrum analyzer and adjust your
dish correctly.
The remote control
does not work
The batteries of the remote control
are not inserted, wrongly inserted or
exhausted.
Check whether the batteries are inserted
correctly or exhausted, if so replace the
batteries in the remote control.
The USB storage device
is not working properly.
Wrong formatted. Format USB device by receiver in
menu Channel>File Explorer.
The external USB
HDD does not start.
Power consumption is too high. Connect an extra power supply
adapter to your USB HDD device.
The receiver switches
to STBY automatically.
Auto Power Down function is
activated and reached the adjusted
time (default 3h).
In the menu Setup>Time Setting you
can adjust the Auto Power Down time
or disable it.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7300 CI plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7300 CI plus in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 7300 CI plus

Strong SRT 7300 CI plus User Manual - English - 23 pages

Strong SRT 7300 CI plus User Manual - German - 29 pages

Strong SRT 7300 CI plus User Manual - Dutch - 23 pages

Strong SRT 7300 CI plus User Manual - French - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info