BLUE Allows you to enter the time to start playback. To enter the desired time use
09 and press OK to start the playback at this time.
*This user manual describes the full functionality including the recording function and may not be applicable if the software for recording via USB has
not yet been installed.
7.7.4.5 DVR Congure*
Find technical details about your USB device, like Partitions, Timeshiftsize, Total space and Free space.
7.7.4.6 Format*
WARNING The format function will delete all data and information from your USB
device or selected partition. STRONG will not take any responsibility for
damaged or lost data on the USB device.
If you have multiple partitions on your storage device, select the partition you would like to format
and press OK to continue. An attention banner will now be displayed. Press OK to start formatting (or
to cancel it). The format procedure will take some time, depending on the size of the used storage
device. At the end of the process, the “Formatting is complete” message will appear. Press to exit
the menu.
8.0 TROUBLESHOOTING
There may be various reasons for abnormal operation of the receiver. Please check the receiver
according to the procedures shown below. If the receiver does not work properly after checking it,
please contact your local Service line or STRONG dealer. Alternatively, you can send a support mail via
our website: www.strong.tv. NEVER open or disassemble your receiver. This may cause a dangerous
situation and will void the warranty.
PROBLEMPOSSIBLECAUSEWHATTODO
The standby indicator does
not light up
The mains lead is unplugged/
the multipoint connector is
switched o.
Check the mains lead/switch
the multipoint connector on.
No pictureThe receiver can’t receive
signal.
Check the antenna cable,
replace the cable, or connect
the cable to the receiver
tightly.
Incorrect values of some tuner
parameters.
Set the values of tuner
parameters correctly in the
Installation menu.
Wrong direction of the dish.Check signal strength and
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Strong SRT 7008 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Strong SRT 7008 in the language / languages: English as an attachment in your email.
The manual is 0,88 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
