568528
30
Zoom out
Zoom in
Previous page
1/34
Next page
26
PART 1 • English
(15 min steps) and pq (1 hour steps), you can setup the recording length
time and then press 4 again. During the recording you can change the
recording length time by pressing 4.
Default Recording Period:
You can setup the default recording time period by pressing tu.
*This user manual describes the full functionality including the recording function and may not be applicable if the PVR
software has not yet been installed.
8.0 TROUBLESHOOTING
There may be various reasons for abnormal operation of the receiver. Please check the receiver
according to the procedures shown below. If the receiver does not work properly after checking
it, please contact your local Service line or a STRONG dealer. Alternatively you can send a support
mail via our website: www.strong.tv. NEVER open or disassemble your receiver. This may cause a
dangerous situation and will void the warranty.
Problem Possible cause What to do
The display on the front
panel does not light up.
Mains cable is not
connected
Mains fuse blown
Check that the mains cable is
plugged into the power socket
Check mains fuse
No sound or picture,
but the front panel shows
red light
The receiver is in standby
mode
Press the On/Standby button
No sound or picture, but the
receiver menu can be seen
on TV screen.
(press ‘menu’ on remote)
Channel is off-air
The satellite dish is not
pointing at the (correct)
satellite.
Channels deleted in edit
menu
Try other channel(s).
Check the signal level in the
Antenna Setup menu. Adjust
the dish.
Scan for channels (again)
No signal or weak signal,
intermittent reception.
Cables might have
loosened.
Moisture might have
entered into cables or
connectors.
Heavy rain at present.
Heavy storm at present.
Check the cable connections,
LNB and other equipment
connected between the LNB
and the receiver, or peak
the dish.
Wait for rain/storm to subside
The satellite dish is not
pointing at the (correct)
satellite(s)
Adjust the dish. Ask a local
satellite specialist for advice.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7004 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7004 in the language / languages: English as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 7004

Strong SRT 7004 User Manual - German - 40 pages

Strong SRT 7004 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info