480579
14
Zoom out
Zoom in
Previous page
1/15
Next page
11
PART 1 • English
English
6.4 Channel list and view mode
In viewing mode press OK button and the channel list will be shown. Press the pq buttons to select the channel and press
the OK button to view selected channel. To switch between TV and Radio channels press the TV/Radio button.
You can sort channels by FTA -> CAS by pressing the RED button, or A-Z by pressing the YELLOW button.
You can select satellite by pressing the GREEN button.
6.5 FAV list
In viewing mode, you can get the Favorite channel list by pressing the FAV button. Press the RED button to change FAV group.
If you did not set favorite channels before, it will show All channels list.
6.6 Teletext function
In channel view mode press the TEXT button. The OSD Teletext will be shown in case Teletext is available on the current
program. With the pq buttons you can scroll displayed page number. You can insert page number directly with the numeric
buttons.
6.7 Subtitle function
In channel view mode press the F2 button. The list of selectable subtitle languages will appear if DVB subtitle available. With
the pq buttons select the subtitle language and press the OK button. In case DVB subtitle aren’t available you can search at
Teletext if therefor subtitles are available.
NOTE: The availability of DVB subtitle depends on the broadcaster.
6.8 Sleep Timer function
Press the F1 button to activate the sleep timer. Use the tu buttons to switch between following modes: OFF, 15 Min, 30
Min, 45 Min, 60 Min, 90 Min,120 Min and -- Min -> where you can enter your preferred time.
6.9 Zoom function
Press GREEN (Zoom) button to get pointer, then use the pq and tu buttons to select position you want to zoom in and
press OK to activate the function.
A.1 TROUBLESHOOTING
There may be various reasons for the abnormal operation of the receiver. Check the receiver according to the procedures
shown below. If the receiver does not work properly after checking it, please contact the dealer. Do NOT open the receiver
cover. It may cause a dangerous situation and the warranty will get void.
Problem Possible causes What to do
The display on front panel does
not light up.
The power cord is not plugged in. Check that the power cord is plugged in to
the wall outlet.
No picture or sound Wrong connection of the Audio/
Video output of the receiver to TV.
Audio muting.
TV power off.
Connect the Audio/Video output of the
receiver to TV correctly.
Press the Mute button
Turn TV on.
No picture The receiver can’t receive the signal
Incorrect values of some tuner
parameters.
Wrong direction of the dish
Check the antenna cable, replace the cable,
or connect the cable to the receiver tightly.
Set the values of tuner parameters correctly
in installation menu.
Check the signal strength with a
professional satellite finder and adjust your
dish correctly or call a professional installer.
The remote control
does not work
The batteries of the remote control
are not inserted or exhausted
Check whether the batteries are inserted
correctly or if they are exhausted and replace
them.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 6511 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 6511 in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info