424585
30
Zoom out
Zoom in
Previous page
1/33
Next page
PART 7 • Quick Set Up Guide • Romanian
Nota: De fiecare data cand receptorul cere codul PIN, introduceti ‘0000’ de pe telecomanda folosind
tastele numerice [0-9]. Initial este setata limba engleza. Pentru a alege o alta limba urmati
procedura indicata mai jos la “Setari limba”. Daca receptorul nu este preprogramat, va porni cu
meniul “Setari limba”.
3.1 Setari Limba
Cand porniti pentru prima data receptorul, pe ecranul televizorului va aparea meniul “Setari Limba”.
Pentru a schimba limba meniului, aplicati urmatorii pasi:
n Selectati “Setari Limba”, apasati OK pentru a alege limba dorita, apoi apasati BACK pentru a
iesi in meniul principal.
3.2 Setarea Canalelor:
Setarea canalelor se refera la cautarea si memorarea programelor transmise prin satelit. Aplicati pasii
urmatori:
1. Apasati tasta Menu, selectati “Instalare”, selectati “Setare LNB” apoi apasati OK.
n Satelitul: Selectati “Satelit” apoi apasati OK.
n LNB-ul: Selectati “LNB”, apasati OK si va fi afisat meniul LNB-ului.
Meniul “Setare LNB” seteaza receptorul conform specificatiilor LNB-ului si instalatiei de antena de
care dispuneti.
n LNB: Selectati pana la 16 LNB-uri diferite.
n Tip LNB: Setarea obisnuita e Universal (9750/10600MHz). Selectati tipul LNB-ului,
Universal 1~3 sau Simplu. In Simplu, parametrul e 0 sau un alt numar. Introduceti
valoarea LNB-ului.
n Antena: Folosind tastele Stanga/Dreapta, selectati antena “Fixa” sau “Motorizata”.
n Versiune DiSEqC: Setarea obisnuita e Off. Pentru a folosi un comutator DiSEqC, setati
versiunea pe care o doriti (1.0 sau 1.1).
n Intrare DiSEqC: Selectati pozitiile 1~4 daca folositi comutator DiSEqC 1.0. Selectati
pozitiile 1~16 daca folositi comutator DiSEqC 1.1.
2. Apasati tasta Albastru (Salveare&Iesire) pentru a salva setarile facute si a va inapoia la
meniul “Setare Canale”.
Cand sunteti inapoi in meniul “Setare canale”, aplicati urmatorii pasi:
n Pozitia antenei: Selectati “Pozitie Antena” si apasati tasta OK. Va fi afisata pozitia
antenei pe satelitul curent. Daca folositi un pozitioner DiSEqC 1.2, puteti selecta pozitia
in acest camp. Pentru a seta pozitia antenei, starea trebuie sa fie “ON” si poate fi setata
pe “ON” daca “Antena” e setata ca “Motorizata” in meniul “Setare LNB”.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong srt 6125 fta at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong srt 6125 fta in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong srt 6125 fta

Strong srt 6125 fta User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info