424428
5
Zoom out
Zoom in
Previous page
1/74
Next page
Part 1 • English
www.strongsat.com 7
highlighted menu item.
6. Exit Button
Exits from the current menu or cancels the current operation in progress if applicable
7. Common Interface Slots
Behind the lid of the front panel you will find two slots where you can insert your
Common Interface Modules.
8. LCD Display
The 4-digits display the channel number. In "stand-by" mode, the 7 segments display
the local time.
2.2 Rear Panel (Please see inside cover Figure 2)
1. LNB IN
Connect the digital signal from your LNB of your satellite dish to this connector.
2. LOOP OUT
Gives you the possibility to connect an extra receiver (analogue or digital).
3. AUDIO Right (Red RCA) and Left (White RCA)
These connectors give you tile possibility to connect the audio signal to an external
amplifier or to the audio input of your TV.
4.VIDEO (Yellow RCA)
This connector has a constant video signal for additional VCR-connections
5. DC 0/12V I50mA OUT (Black RCA)
This connector gives you the possibility to connect a device, operated by 0/12 Volts,
150mA supplied by your receiver (e.g.: to switch between 2 satellites by using a 0/12V
switch). This RCA can be activated via the On Screen Display (satellite set-up). Be
careful when connecting and activating this Black RCA. The 0/12V current can cause
severe damage to your equipment if connected in the wrong way.
6.TV Scart Connector
Use this connector to connect your receiver to your TV using a scart cable.
7.VIDEO Scart Connector
Use this connector to connect your receiver to your video recorder using a scart cable.
Your video signal will now be looped through to your TV.
8. RS232 Serial Port
This serial port can be used to connect your PC to your receiver, and enables you to
Part 1 • English
8 www.strongsat.com
download new versions of software into your receiver. Detailed information about
downloading software into your receiver can be found on our website
(www.strongsat.com
).
Note: It is recommended to ONLY use tile original software provided via our website.
Loading other versions of software not adapted to your model number might cause
severe damage to your receiver, and will not be covered by Strong.
9. ANT
RF Modulator (female pall). If you have cable TV or if you have an outdoor antenna,
then you can connect the RF cable coming from the antenna or wall connector to this
ANT input, if you use a scart cable to connect the receiver to your TV, the additional
antenna can be put directly into your TV.
10. TV/VCR
RF Modulator (male part). If you do not use a scart cable to connect your receiver to
your TV, or if you have connected a cable to the ANT input, you will have to use this
connector to connect the receiver to your TV by using a coaxial cable.
11. S/PDIF
Use this Optical output to connect your receiver to the input of your digital audio
amplifier.
12. Power Cord
Your receiver requires a current of 90-240V AC (Auto-selectable),50-60Hz+/-5%.
Make sure to check the power specification of the wall outlet before connecting your
receiver to the main power
2.3 Remote Control Unit (Please see inside cover Figure 3)
All features of the set-top box can be controlled with the remote control.
Inserting batteries to the Remote Control Unit:
1. Open the bottom cover on the backside of the remote control Unit.
2. Insert the two supplied batteries (1.5V) observing the polarity (+/-) and the "AAA"
specification.
3. Firmly replace the bottom cover.
1. LANG (Language)
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong srt 4356 pvr at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong srt 4356 pvr in the language / languages: English, German, Italian as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info