751408
24
Zoom out
Zoom in
Previous page
1/26
Next page
Make sure the antenna is properly connected.
Make sure the volume is not set to minimum or the sound is not set to mute.
Make sure the headphones are not connected.
The TV may be receiving a signal other than from TV broadcasting stations.
Picture is not clear.
Make sure the antenna cable is properly connected.
Consider whether your TV signal is being properly received.
Poor picture quality can occur due to a VHS camera, camcorder, or other peripheral being
connected at the same time. Switch off one of the other peripherals.
The ‘ghost’ or double image may be caused by obstruction to the antenna due to high-rise
buildings or hills. Using a highly directional antenna may improve the picture quality.
The horizontal dotted lines shown on the pictures may be caused by electrical interference, e.g.,
hair dryer, nearby neon lights, etc. Turn off or remove these.
Picture is too dark, too light or tinted.
Check the colour adjustment.
Check the brightness setting.
Check the sharpness function.
Remote control does not work.
Check the batteries of the remote control.
Make sure the remote sensor window on the TV front is not under strong fluorescent lighting.
Try to clean the remote sensor window on the TV front with a soft cloth.
If the above suggestions do not solve your technical issue, please refer to the warranty card for
service information.
8.0 TELEVISION SPECIFICATIONS
TV Broadcasting PAL/SECAM BG/DK/I/LL’
Receiving channels VHF/UHF/Cable
Tuner type Frequency synthesized
Operating Conditions
Temperature 5 °C ~ 35 °C (41 °F ~ 95 °F)
Humidity 20 ~ 80% (non-condensing)
Storage Conditions
Temperature -15 °C ~ 45 °C (5 °F ~ 113 °F)
Humidity 10 ~ 90% (non-condensing)
OSS Notice
This product uses software library from Freetype Project.
This product uses software library which is distributed under the zlib license.
This product uses UNICODE software programmes which are distributed under IBM Open source
license. This product uses glibc software programmes which are distributed under the GNU license.
20
PART 1
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 32HY4002N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 32HY4002N in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info