555273
4
Zoom out
Zoom in
Previous page
1/40
Next page
4
Finishing sander
INTENDED USE
This tool is intended for dry sanding and nishing of wood,
painted surfaces, plastic and ller
TECHNICAL SPECIFICATIONS 1
PRODUCT ELEMENTS 2
1 On/Off switch
2 Switch locking button
3 Dust bag
SAFETY
WARNING! Read all instructions. Failure to follow all in-
structions listed below may result in electric shock, re
and/or serious injury.
Avoid damage that can be caused by screws, nails and
other elements in your workpiece; remove them before
you start working
Always keep the cord away from moving parts of the
tool; direct the cord to the rear away from the tool
When you put away the tool, switch off the motor and
ensure that all moving parts have come to a complete
standstill
Use completely unrolled and safe extension cords with
a capacity of 16Amps (U.K. 13Amps)
In case of electrical or mechanical malfunction, imme-
diately switch off the tool and disconnect the plug
SBM Group can assure awless functioning of the tool
only when original accessories are used
This tool should not be used by people under the age
of 16 years
The noise level when working can exceed 85 dB(A);
wear ear protection
If the cord is damaged or cut through while working, do
not touch the cord, but immediately disconnect the plug
Never use tool when cord is damaged; have it replaced
by a quali ed person
Always check that the supply voltage is the same as
the voltage indicated on the nameplate of the tool (tools
with a rating of 230V or 240V can also be connected to a
220V supply)
This tool is not suitable for wet sanding
Do not work materials containing asbestos (asbestos is
considered carcinogenic)
When sanding metal, sparks are generated; do not use
dustbox and keep other persons and combustible material
from work area
Do not touch the moving sanding sheet
Do not continue to use worn, torn or heavily clogged
sanding sheets
Wear protective gloves, safety glasses, close- tting
clothes and hair protection (for long hair)
Take protective measures when during work dust can
develop that is harmful to one’s health, combustible or ex-
plosive (some dusts are considered carcinogenic); wear a
dust mask and work with dust/chip extraction when con-
nectable
Always disconnect plug from power source before
making any adjustment or changing any accessory
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
Do not connect the blue (= neutral) or brown (= live)
wire in the cord of this tool to the earth terminal of the
plug
If for any reason the old plug is cut off the cord of this
tool, it must be disposed of safely and not left unattended
the dust suction requires the use of perforated sanding
sheets
perforation in sanding sheet should correspond with
perforation in sanding foot
replace worn sanding sheets in time
always use the tool with the total sanding surface
covered with sanding paper
before the sanding surface reaches the workpiece, you
should switch on the tool
before switching off the tool, you should lift it from the
workpiece
do not apply too much pressure on the tool; let the
sanding surface do the work for you
Your machine is double insulated in accordance with EN
50144; therefore no earthwire is required.
MAINTENANCE
Make sure that the machine is not live when carrying out
maintenance work on the motor.
Regularly clean the machine housing with a
soft cloth, preferably after each use. Keep the
ventilation slots free from dust and dirt.If the dirt
does not come off use a soft cloth moistened with soapy
water. Never use solvents such as petrol, alcohol, ammo-
nia water, etc. These solvents may damage the plastic
parts.
The machine requires no additional lubrication.
Should a fault occur, e.g. after wear of a part, please con-
tact your local SBM Group dealer.
ENVIRONMENT
In order to prevent the machine from damage during
transport, it is delivered in a sturdy packaging. Most of the
packaging materials can be recycled. Take these materi-
als to the appropriate recycling locations. Take your un-
wanted machines to your local SBM Group dealer. Here
they will be disposed of in an environmentally safe way.
English
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stomer SFS-500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stomer SFS-500 in the language / languages: All languages as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info