52161
3
Zoom out
Zoom in
Previous page
1/10
Next page
13FG 3
english
Equipment and features
This instruction manual refers to
several models with different
features. Components that are not
installed in all models and related
applications are marked thus
*.
Such components are available as
special accessories from your
STIHL dealer.
Engineering improvements
STIHLs philosophy is to continually
improve all of its products. As a result,
engineering changes and improvements
are made from time to time. If the
operating characteristics or the
appearance of your machine differ from
those described in this manual, please
contact your STIHL dealer for
assistance.
To reduce the risk of
personal injury, special
safety precautions must
be observed while
operating the filing tool.
Read the operating
instructions carefully and
keep them in a safe place
for later reference.
Always shut off the saw engine before
working with the filing tool:
Move Master Control lever / slide control
or the separate stop switch to
STOP or $.
Electric saws: Disconnect plug from
power supply.
Wear gloves.
It is absolutely essential to comply with
the angles and dimensions specified in
these instructions. If the saw chain is
incorrectly sharpened – and in
particular if the depth gauges are set too
low – there is a risk of increased saw
kickback and personal injury.
Observing the safety precautions and
specifications in these instructions and
the owner’s manual of the saw model on
which the filing tool is mounted can help
reduce the risk of injury and damage to
the saw.
The STIHL filing tool can be used to
sharpen all STIHL Oilomatic saw chains
with the exception of square ground
chains (RSL, RSLF, RSLH) and carbide-
tipped chains (RD, RDS). Sharpening is
effected with the guide bar and chain
mounted on the saw.
For accurate results it is best to clamp
the guide bar in a bench vise or, at the
cutting site, in the STIHL bar vise
(special accessory).
File correctly
Sharpen the chain frequently, take
away as little metal as possible –
two or three strokes of the file are
usually enough.
Always file from the inside to the
outside of the cutter.
The file only sharpens on the
forward stroke – lift the file off the
cutter on the backstroke.
Avoid touching the tie straps and
drive links with the file.
Safety Precautions Application
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl FG3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl FG3 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl FG3

Stihl FG3 User Manual - German, French, Italian, Portuguese, Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info