564046
4
Zoom out
Zoom in
Previous page
1/578
Next page
2
User’s manual
EN
GENERAL INFORMATION
INTRODUCTION
Congratulations on purchasing this product, which we are certain will meet your needs and expectations. This project was created by ZUCCHETTI
CENTRO SISTEMI S.p.A. (UNI EN ISO 9001 certi ed company), a software house that since 1982 has consolidated its activities and presence
on the international market.
Applying advanced IT solutions in the eld of industrial automation means optimising the production activities and simplifying the work procedures.
This product was created on the basis of on-going research by ZUCCHETTI’s laboratories.
PURPOSE OF THE MANUAL
This manual forms an integral part of the appliance and was produced by the Manufacturer to provide the necessary information to people
authorised to interact with it during its working life.
Operators of the appliance must adopt correct working practices and must carefully read and follow all the instructions contained in this
manual.
This manual is written by the Manufacturer in the original language of Italian and may be translated into other languages to meet legal and/
or commercial requirements.
Carefully read the instructions contained in this manual to avoid any unnecessary risks to people’s health and safety, as well as economic
damages.
Keep this manual in a safe and easily accessible place for quick reference.
Some information and illustrations contained in this manual may not perfectly correspond with the appliance in your possession; however,
this does not affect its functioning.
The Manufacturer reserves the right to make changes without any obligation to provide prior notice.
The following symbols are used throughout this manual to highlight some particularly important information or to identify some important
speci cations.
Danger - Attention
This symbol indicates situations involving imminent danger, which, if ignored, could put people’s health and safety at risk.
Warning – Caution
This symbol indicates situations where it is necessary to behave in a certain way in order to avoid putting people’s health
and safety at risk, and to protect the device.
Important
This symbol identi es particularly important technical information which must not be ignored.
IDENTIFICATION OF MANUFACTURER AND EQUIPMENT
The nameplate shown here is applied directly onto the appliance. It
contains references and all the information essential for safely operating
the device.
For any technical requirements, please contact the Manufacturer’s
Technical Service Centre or an authorised dealer.
For technical assistance, please indicate the data reported on the
identi cation plate, the approximate hours of use and the type of fault
detected.
A. Name of manufacturer
B. CE conformity label
C. Model / serial number / manufacturing year
D. Technical speci cations
(C) Manufacturing year
(C) Model
(B) CE conformity label
(A) Name of manufacturer
(D) Technical specifications
(C) Serial number
DATA PLATE
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga Autoclip 527S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga Autoclip 527S in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 115,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info