516583
5
Zoom out
Zoom in
Previous page
1/578
Next page
3
User’s manual
EN
SAFETY INFORMATION
SAFETY REGULATIONS
During design and construction, the manufacturer carefully considered the possible hazards and personal risks that may result from
interacting with the equipment. In addition to observing the applicable laws in force, the manufacturer adopted all the “good manufacturing
practice regulations.” The purpose of this information is to inform users on the need to use extreme caution to avoid risks.
When using the robot for the rst time, it is recommended to carefully read the whole manual and to be sure to fully understand it, especially
the safety information.
Lift and handle the equipment according to the information reported on the packaging, on the appliance and in the user instructions supplied
by the Manufacturer.
Pay attention to the symbols that appear on all the safety labels. They are coded by shape and colour for safety purposes. Keep them legible
and always follow the instructions indicated.
The lawn mower robot can only be used by people who know how to operate it and who have read and understood the instructions in this
manual.
Only use the equipment for the purposes speci cally intended by the manufacturer. Improper use of the equipment may be hazardous to
personal safety and health and may lead to economic losses.
Before using the lawn mower robot , make sure there are no objects on the lawn (toys, tree branches, clothing items, etc.).
When using the robot, make sure there are no people (especially children, the elderly or disabled people) and pets in the work area so as to
prevent safety risks. To avoid this risk, it is recommended to program the robot to operate at suitable times of the day.
Never allow people to sit on the robot.
Never lift the robot to inspect the blade while it is running.
Do not place hands and feet under the robot when it is in operation and moving, especially near the wheel area.
Never remove, bypass or tamper with the safety devices installed. The failure to observe these requirements may lead to serious personal
health and safety risks.
Perform all maintenance activities recommended by the manufacturer. Proper maintenance will allow obtaining the best performances and
longer operating times.
Before maintenance or adjustments, which can also be performed by a user with minimal technical competence, disconnect the power
supply. The user must ensure that all the necessary safety conditions are in place, especially when working on the lower part of the lawn
mower robot, following the Manufacturer’s procedures and instructions.
Use the personal protection devices recommended by the Manufacturer, in particular, always wear protective gloves when handling the
cutting blade.
Before replacing the batteries, always remove the blade.
Make sure the air vents of the power supply unit are free and clear of residuals.
To avoid irreversible damage to the electric and electronic parts, do not wash the robot with water jets at a high pressure and do not immerse
it in water, partially or completely, as it is not watertight.
Operators who perform repairs during the working life of the robot must have the necessary technical expertise, skills and experience in this
speci c eld. The lack of these requirements may be hazardous to the health and safety of people.
Any work to be performed on the charging station must be carried out with plug of the power cord disconnected.
Replace any worn or deteriorated parts with original spare parts to ensure proper functioning and safety.
The robot cannot be used without the top cover. If the mechanical parts of the robot are damaged, replace them.
Any routine or extraordinary maintenance (e.g. battery replacement) must be performed by an authorised service centre.
The Manufacturer shall not be held liable if non-original spare parts are used.
Never use and recharge the robot in explosive and/or ammable environments.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga Autoclip 127 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga Autoclip 127 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 112,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info