Manual Steinel NightMatic 3000 Vario (page 5 of 53) (All languages)

592552

Zoom out

Zoom in

1/53

Light does not switch OFF

n Surroundings not yet

bright enough

n Wait until it is light

enough; if necessary,

define a new light ON

brightness (in the

evening)

Light does not switch ON

in the morning

n Function not properly

activated

n Set function as de-

scribed in "Setting for

morning hours"

Light switches ON or OFF

at unusual times

n Change from summer to

winter time or vice versa

n Switching times incor-

rectly computed

n Switching times are

geared towards light

levels. Change setting

if necessary

n Re-define switch-ON light

level (switching times will

be re-computed)

This STEINEL product has

been manufactured with

utmost care, tested for

proper operation and safe-

ty and then subjected to

random sample inspection.

STEINEL guarantees that it

is in perfect condition and

proper working order.

The warranty period is 36

months and starts on the

date of sale to the con-

sumer. We will remedy

defacts caused by material

flaws or manufacturing

faults. The warranty will be

met by repair or replace-

ment of defective parts at

our own discretion.

This guarantee does not

cover damage to wearing

parts, damage or defects

caused by improper treat-

ment or maintenance nor

does it cover breakage as a

result of the product being

dropped. Further conse-

quential damage to other

objects shall be excluded.

Claims under the guaran-

tee shall only be accepted

if the product is sent fully

assembled and well

packed complete with

sales slip or invoice (date

of purchase and dealer's

stamp) to the appropriate

Service Centre or handed

in to the dealer within the

first 6 months.

Repair service:

If defects occur outside the

warranty period or are not

covered by warranty, ask

your nearest service sta-

tion for the possibility of

repair.

This product complies with

- Low-Voltage Directive 2006/95/EC

- EMC Directive 2004/108/EC

- WEEE Directive 2012/19/EC

Declaration of Conformity

Functional Warranty

Malfunction Cause Remedy

Troubleshooting

NightMatic 3000 Vario

without power

n Fuse has blown; not swit-

ched ON; break in wiring

n Short-circuit

n New fuse, turn on power

switch, check wiring with

voltage tester

n Check connections

Light does not switch ON

n Bulb faulty

n No power supply

n Surroundings still too

bright

n Change bulb

n See "NightMatic 3000

Vario without power"

n Wait until ambient light

reaches ON brightness;

if necessary, define new

switch-on value (using

button)

Dimensions: (H x W x D) 99 x 74 x 37 mm

Mains voltage: 230/240 V, 50 Hz

Switching capacity:

Incandescent lamps, 1000 W max. at 230 V AC

Fluorescent lamp, 500 W max., at cos ϕ = 0.5,

inductive load at 230 V AC

4 x 58 W max., C ≤ 88 µF

at 230 V AC *1)

Response threshold: adjustable from approx. 0.5–10 lux

(factory setting 1 lux)

Night economy mode: variable night 'OFF' time

(factory setting: 'OFF' at approx. 1.30 a.m.)

Intrinsic power

consumption < 0.8 W

Protection class: IP 54

*1)

Fluorescent lamps, low-energy lamps, LED lights with electronic ballast

(total capacity of all ballasts connected below the level stated).

Technical Specifications

Malfunction Cause Remedy

After putting the unit into

operation and defining the

twilight setting for the first

time, the light stays ON all

through the first night until

the morning so that it can

determine light levels at

dusk and dawn. The night

economy mode works with

these values in the nights

that follow and constantly

optimises its setting. So, af-

ter putting the unit into op-

eration for the first time and

after changing the settings,

always give the electronic

system a few days time to

"learn" the new light levels.

All values set remain intact

even in the event of a power

failure. Please do not shade

the light sensor to ensure

trouble-free operation.

Note:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Steinel NightMatic 3000 Vario in the language / languages: All languages as an attachment in your email.

The manual is 1,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Steinel NightMatic 3000 Vario Manual

Product: