720680
5
Zoom out
Zoom in
Previous page
1/8
Next page
5
ENGLISH
(Original instructions)
Do not allow paint to adhere to the nozzle or scraper
as it could ignite after a time.
Do not operate your heat gun whilst it is hanging by
the hanging hook.
A fire may arise if the appliance is not used with
care.
Do not place the nozzle against anything while using
or immediately after use.
Do not poke anything down the nozzle as it could
give you an electric shock.
Features (fig. A)
1. Two speed switch
2. Support Stand/Hanging Hook
3. Ventilation slots
4. Nozzle
Handling Your Heat Gun
Do not place your hand over the ventilation slots (3) or block
these vents in any way. This restricts the airflow through the
element and causes over heating.
Operating Your Heat Gun (fig. B)
To switch your heat gun on at the low temperature
setting, press the switch (1) to depress to position “I”.
To switch the tool on at the high temperature setting, set
the switch (1) to position “II”.
To switch the tool off, set the on/off switch (1) to position “0”.
Note: Allow the element to heat up for a few seconds before
use. Initially, some smoke may emit from your heat gun. This
is normal and will soon cease.The position of the switch
controls both the fan speed and temperature of the product.
Cooling Down
In use, the nozzle (4) of your heat gun becomes extremely hot.
Great care is necessary when cooling your heat gun after use.
Hands Free Use (fig. D)
This tool can also be used in stationary mode.
Place the tool onto a firm and stable surface as shown.
Always point your heat gun away from you.
Secure the cable to prevent pulling your heat gun off the
stand.
Do not touch the nozzle (4) and ensure that
nothing is dropped into the nozzle. Carefully switch
off your heat gun and then allow it to cool
Paint Stripping
Your heat gun is designed to soften paint and lacquer
enabling it to be removed using a good quality hand scraper.
Proceed as follows: Direct the hot air onto the area to be
removed. When the paint softens, scrape firmly. Experiment
to establish the length of time necessary to apply the heat to
obtain optimum results. Scrape the softened paint
immediately or it will harden again.
Your heat gun is not suitable for stripping metal-framed
windows. This is because the heat from the heat gun is
conducted through the metal and can crack the glass.
Scrape with the grain of the wood wherever possible. Do not
linger on one spot for too long as the surface may char or
ignite.
Accessories
The performance of your tool depends on the accessory
used. Stanley and Piranha accessories are engineered to
high quality standards and designed to enhance the
performance of your tool. By using these accessories you
will get the very best from your tool.
Read
Instructions
Manual
Use Eye
Protection
Use Ear
Protection
V ........ Volts
A ........ Amperes
Hz ....... Hertz
W ........ Watts
min ..... minutes
..... Alternating
Current
..... Direct
Current
n
0
....... No-Load
Speed
...... Class II
Construction
.... Earthing
Terminal
.... Safety Alert
Symbol
.../min.. Revolutions
or Recipro-
cation per
minute
Labels on tool
The label on your tool may include the following symbols:
Position of date barcode
The Date Code, which also includes the year of
manufacture, is printed into the housing.
Example:
2014 XX JN
Year of manufacturing
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley SXH1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SXH1800 in the language / languages: English as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info