720414
3
Zoom out
Zoom in
Previous page
1/46
Next page
Use the specified lubricant to lubricate the tool.
Make use of the filler while conducting lubrication and limit the flow to two (2) drops per minute.
If the filler is unavailable, lubrication should be conducted whilst rotating the tool every one (1) to two (2)
minutes until it is complete.
The life span and performance of the tool will be greatly improved if the aforementioned steps are taken.
Thoroughly read and understand the user manual before attempting to operate
the tool.
Any attempt to alter the structural design and mechanics of the tool may result in
grievous bodily harm.
Do not directly point the tool at any living object.
Consistently wear protective gear, such as safety goggles, ear plugs, and mask, while
operating the tool. The use of protective gear is also advisable while repairing or
changing the tool’s spare parts.
Long hair must be tied back and it is advisable to remove all adornments including,
but not limited to scarves, neckties, and clothing with loose sleeves, to avoid any
interference with the tool.
Do not make direct contact with any part of the transmission while the tool is
in operation.
Only purchase and use original Stanley spare parts in order to maintain the precision
and accuracy of the tool.
Operating the air tool will deliver strong back throw; please stabilize yourself with
equal strength
During repair and maintenance or when not in use, turn off the air compressor and
remove the tool from the air source.
Ensure that the air tube is not placed in an area with high foot traffic.
Should bodily irritation, numbness, or fatigue occur at any time during the operation
of the tool, seek immediate medical attention.
03
Maintenance Notifications:
WARNING
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley STMT99300-8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley STMT99300-8 in the language / languages: English as an attachment in your email.

The manual is 3,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info