805835

Stanley STEL401 Manual

13
Zoom out
Zoom in
Previous page
1/14
Next page
ENGLISH • 13
ASSEMBLY
Warning! Before assembly, make sure that the tool is
switched off and unplugged.
Fitting sanding sheets (FIG. B y C)
Warning! Never use the tool without a sanding sheet or
accessory in place.
Fitting sanding sheets with nylon loops (FIG. B)
Warning! Make sure that the tool is switched off and
unplugged.
fPress the sheet firmly and evenly onto the sanding
base (4), making sure that the holes in the sheet line
up with the holes in the base.
Fitting regular sanding sheets (FIG. C)
Warning! Make sure that the tool is switched off and
unplugged.
fSoften the sanding sheet by rubbing its non-abrasive
side over the edge of a worktop.
fPress the paper clamp levers (5) upwards to release
them from the retaining grooves and open the paper
clamps (5) by pressing them down.
fPlace the sheet onto the sanding base (4).
fInsert the edge of the sanding sheet into the front
paper clamp (5) as shown.
fPress the front paper clamp lever (5) downwards and
locate it in the retaining groove.
fWhile keeping a slight tension on the sheet, insert the
rear edge of the sheet into the rear paper clamp (5).
fPress the rear paper clamp lever (5) downwards and
locate it in the retaining groove.
Fitting and removing the dustbag (FIG. D)
fFit the dustbag (2) over the dust extraction outlet (3).
fSlide the dustbag (2) onto the tool and make sure that
it is securely located.
fTo remove the dustbag (2), pull it to the rear and off
the outlet.
USE
Warning! Let the tool work at its own pace. Do not
overload.
Switching on and off (FIG. F)
fTo switch the tool on, press the part of the on/off
switch (1) marked ‘I’.
fTo switch the tool off, press the part of the on/off
switch (1) marked ‘0’.
Emptying the dustbag
fThe dustbag (2) should be emptied every 10 minutes.
fShake the dustbag (2) to empty the contents
Hints for optimum use
fDo not place your hands over the ventilation slots.
fDo not exert too much pressure on the tool.
fRegularly check the condition of the sanding sheet.
Replace when necessary.
fAlways sand with the grain of the wood.
fWhen sanding new layers of paint before applying
another layer, use extra fine grit.
fOn very uneven surfaces, or when removing layers of
paint, start with a coarse grit. On other surfaces, start
with a medium grit. In both cases, gradually change to
a fine grit for a smooth finish.
fConsult your retailer for more information on available
accessories.
MAINTENANCE
Your Stanley tool has been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
tool care and regular cleaning.
Warning! Before performing any maintenance, switch
off and unplug the tool.
fRegularly clean the ventilation slots in your tool using
a soft dry brush or dry cloth.
fRegularly clean the motor housing using a clean
damp cloth. Do not use any abrasive or solvent-based
cleaner.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your STANLEY
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
SERVICE INFORMATION
STANLEY offers a full network of company-owned and
authorized service locations. All STANLEY Service Centers
are staffed with trained personnel to provide customers with
efficient and reliable power tool service. For more information
about our authorized service centers and if you need technical
advice, repair, or genuine factory replacement parts, contact the
STANLEY location nearest you.
… 13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley STEL401 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley STEL401 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 3.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info