Manual Stanley SFMCHTB866 (page 7 of 124) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

720491

Zoom out

Zoom in

1/124

ENGLISH

power tools. Such preventive safety measures reduce the

risk of starting the power toolaccidentally.

d ) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrainedusers.

e ) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained powertools.

f ) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier tocontrol.

g ) Use the power tool, accessories and tool bits etc.,

in accordance with these instructions taking into

account the working conditions and the work to be

performed. Use of the power tool for operations different

from those intended could result in a hazardoussituation.

5) Battery tool use and care

a ) Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used with

another batterypack.

b ) Use power tools only with specifically designated

battery packs. Use of any other battery packs may create

a risk of injury andfire.

c ) When battery pack is not in use, keep it away from

other metal objects like paper clips, coins, keys,

nails, screws or other small metal objects that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause burns

or afire.

d ) Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation orburns.

6) Service

a ) Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool ismaintained.

Additional Safety Instructions for Hedge

Trimmers



WARNING: Cutting elements continue to rotate after the

motor is switchedoff.

• Keep all parts of the body away from the cutter blade.

Do not remove cut material or hold material to be cut

when blades are moving. Make sure the switch is off

when clearing jammed material. A moment of inattention

while operating the tool can result in serious personalinjury.

• Carry the hedge trimmer by the handle with the cutter

blade stopped. When transporting or storing the hedge

trimmer always fit the cutting device cover. Proper handling

of the hedge trimmer will reduce possible personal injury from the

cutterblades.

• Hold the power tool by insulated gripping surfaces only,

because the cutter blade may contact hidden wiring.

Cutter blades contacting a "live" wire may make exposed metal

parts of the power tool "live" and could give the operator an

electricshock.

• The intended use is described in this instruction manual. The

use of any accessory or attachment or performance of any

operation with this tool other than those recommended in this

instruction manual can present a risk of personal injury and/or

damage toproperty.

• Do not carry the tool with your hands on the front

handle, switch or the trigger switch unless the battery has

beenremoved.

• If you have not used a hedge trimmer before, preferably seek

practical instruction by an experienced user in addition to

studying thismanual.

• Never touch the blades while the tool isrunning.

• Never attempt to force the blades to come to a standstill. u

Do not put the tool down until the blades have come to a

completestandstill.

• Regularly check the blades for damage and wear. Do not use

the tool when the blades aredamaged.

• Take care to avoid hard objects (e.g. metal wire, railings)

when trimming. Should you accidentally hit any such object,

immediately switch the tool off and check for anydamage.

• Should the tool start to vibrate abnormally, immediately switch it off

and remove the battery then check for anydamage.

• If the tool stalls, immediately switch it off. Remove the battery

before attempting to remove anyobstructions.

• After use, place the blade sheath supplied over the blades. Store

the tool, making sure that the blade is notexposed.

• Always ensure that all guards are fitted when using the

tool. Never attempt to use an incomplete tool or a tool with

unauthorisedmodifications.

• Never allow children to use thetool.

• Be aware of falling debris when cutting the higher sides of

ahedge.

• Always hold the tool with both hands and by the

handlesprovided.

Residual Risks

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These risks

can arise from misuse, prolonged useetc.

Even with the application of the relevant safety regulations and

the implementation of safety devices, certain residual risks can

not be avoided. These include:

• Injuries caused by touching any rotating/movingparts.

• Injuries caused when changing any parts, blades

oraccessories.

• Injuries caused by prolonged use of a tool. When using any

tool for prolonged periods ensure you take regularbreaks.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SFMCHTB866 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 13,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stanley SFMCHTB866 Manual

Product: