720670
4
Zoom out
Zoom in
Previous page
1/35
Next page
6
ENGLISH
(Original instructions)
7
ENGLISH
(Original instructions)
Note: If you do not press a button within 5 seconds, the
equalizer programming feature will automatically return to the
previous setting.
Using Bluetooth® Wireless
Technology*
u Turn the radio on (2).
u Go to the Bluetooth settings on your Bluetooth enabled
device.
u Find “P3BTR” under devices and select to pair your
device. The Bluetooth symbol will ash on the LCD display
(9) while the pairing takes place. Once the pairing is
successful the Bluetooth symbol will remain steady.
u To listen to your Bluetooth enabled device through the
radio, press the Bluetooth button (7) or press the mode
button (3) until “bt” appears on the LCD display (9).
u Begin playing music on your device.
Note: The radio does not have to be in the Bluetooth mode
when pairing, only when listening.
*The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Stanley Fat Max is under license. Other trademarks
and trade namesare those of their respective owners.
Incoming Call
If your phone receives a call while it is connected to the radio
it will ring through the radio speakers.
Samsung** To transfer the call to your phone, deselect the
headset option on your phone. The radio will remain mute until
the call is over. End the call normally with your cell phone. The
radio will resume previous function.
**Samsung® is a registered trademarks of Samsung Group.
iPhone®*** Select “audio source” on your phone, then select
“iPhone.” The radio will remain mute until the call is over. End
the call normally with your cell phone. The radio will resume
previous function.
Important Radio Notes
u Reception will vary depending on location and strength of
radio signal.
u Certain generators may cause background noise.
u AM reception will most likely be clearer when powered by
a battery pack.
u To use the auxiliary port (13), plug the output jack from a
CD or iPod®***/MP3 player into the auxillary port. The
sound from the external source plays through the
speakers.
***iPod® and iPhone® are registered trademarks of Apple Inc.
Troubleshooting
If your appliance seems not to operate properly, follow the
instructions below. If this does not solve the problem, please
contact your local Stanley Fat Max repair agent.
Warning! Before proceeding, unplug the appliance.
Problem Possible Solution Possible Cause
Unit will not
power on
Cord not plugged in Plug the radio into a working
outlet
Circuit fuse is blown Replace circuit fuse (if product
repeatedly causses the circuit
fuse to blow, discontinue use
immediately and have it
serviced at a Stanley FatMax
service centre or authorised
servicer)
Circuit breaker is
tripped
Reset circuit breaker (if
product repeatedly causses
the circuit breaker to trip,
discontinue use immediately
and have it serviced at a
Stanley FatMax service centre
or authorised servicer)
Cord or switch is
damaged
Have cord or switch replaced
at a Stanley FatMax service
centre or authorised servicer
Battery is not charged Charge battery
NBC appears on
the LCD window
Battery is not fully
connected
Push battery fully into the
battery port and ensure it is
properly connected
Battery does not have
enough power
Charge battery
Battery has been
removed
Replace battery
Adapter unplugged
without battery in place
Plug adapter into outlet or
properly insert battery
Power to outlet is off
when using adapter
Ensure wall outlet is receiving
power or properly insert
battery
Bluetooth
®
disconnected
Device roamed out of
range
Bring device into range of
raido. Device may need to be
paired to the radio again, see
"Using Bluetooth
®
Wireless
Technology"
Maintenance
Your Stanley Fat Max corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool/appliance care and regular
cleaning.
Warning! Switch off and unplug the appliance before carrying
out any cleaning.
u Dirt and grease may be removed from the exterior of the
appliance using a cloth.
Warning! NEVER use solvents or other harsh chemicals for
cleaning the non-metallic parts of the appliance. These
chemicals may weaken the materials used in these parts. Use
a cloth dampened only with water and mild soap. Never let
any liquid get inside the unit; never immerse any part of the
unit into a liquid.
Warning! NEVER spray or in any other way apply lubricants
or cleaning solvents inside the tool. This can seriously affect
the life and performance of the tool.
Service Notes
This product is not user serviceable. There are no user
serviceable parts inside the radio. Servicing at an authorized
service center is required to avoid damage to static sensitive
internal components.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com.
Technical data
Adapter FMC770 Type 1
Input voltage V
ac
230
Output voltage V
dc
18
Current A 0,4
Battery FMC688L FMC687L
Voltage V
ac
18 18
Capacity Ah 4,0 2,0
Type Li-Ion Li-Ion
EC declaration of conformity
RADIO EQUIPMENT DIRECTIVE
%
FMC770 - Radio
Black & Decker declares that these products described under
"technical data" are in compliance with:
EN 300 328 V2.1.1, EN 303 345 V1.1.7, EN 301 489-1 V2.2.0,
EN 301 489-17 V3.2.0
These products also comply with Directive
2014/53/EU, 2014/35/EU, 2014/30/EU and 2011/65/EU.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical le and makes this declaration on behalf of
Black & Decker.
Ray Laverick
Director of Engineering
Black & Decker Europe, 210 Bath Road, Slough,
Berkshire, SL1 3YD
United Kingdom
30/07/2018
Guarantee
StanleyEurope is condent of the quality of its products and
offers consumers a 12 month guarantee from the date
of purchase. This guarantee is in addition to and in no way
prejudices your statutory rights. The guarantee is valid within
the territories of the Member States of the European Union
and the European Free Trade Area.
To claim on the guarantee, the claim must be in accordance
with Stanley FatMax Terms and Conditions and you will need
to submit proof of purchase to the seller or an authorised
repair agent. Terms and conditions of the Stanley FatMax 1
year guarantee and the location of your nearest authorised
repair agent can be obtained on the Internet at www.2helpU.
com, or by contacting your local Stanley FatMax ofce at the
address indicated in this manual.
Please visit our website www.stanley.eu/3 to register
your new Stanley FatMax product and receive updates on
new products and special offers
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley FMC770 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley FMC770 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info