Manual Spirit ZE20 Elliptical Trainer 2004 (page 12 of 15) (English)

584195

Zoom out

Zoom in

1/15

ZE20

Power up

The elliptical is supplied with a wall mount power supply. When power is connected to the

elliptical, the console will automatically power up. If there is no input to the console for 4

minutes the console will go to stand-by mode. In stand-by mode the console display will

turn off. All work out data will be saved in stand-by mode.

When initially powered on the large display will light. The data windows will show zero and

the program choices will be blinking in the large window. If the console is in stand-by mode,

pressing any key or beginning your exercising will wake the console up.

Starting a program

Quick Start

After the console powers up you may press the Start key to begin, this will initiate the Quick

Start mode. In Quick Start the Time will count up from zero and the workload may be

adjusted manually by pressing the Up/Down buttons. Distance and Calories will accrue,

starting from zero.

The Calorie window will switch between Calories and Watts every 5 seconds. The Calorie

reading shows total Calories burned and is an approximate number. The Watt reading

indicates how much work you are doing. If the Watt reading is 100, this means you are

doing enough work to light a 100 watt light bulb.

The bottom left data window will switch between RPM and Speed every 5 seconds. RPM is

your actual pedal rotation speed, and the Speed readout is in KPH, indicating approximate

road speed as if pedaling a bicycle in 7

gear.

The Distance window shows distance traveled, based on pedal speed, in miles. The Pulse

window will display your heart rate in beats per minute if you are holding the heart rate

hand sensors, or wearing a chest strap transmitter.

Manual

Using the Up/Down keys, highlight the Manual icon at the top of the display and press

Mode key. The profile will be blinking and you may use the Up/Down keys to adjust the

program work level and then press Mode. The Time window will now be blinking. Use the

Up/Down keys to adjust the program Time and then press Mode. The Distance window will

now be blinking and you can adjust a target Distance using the Up/Down keys then press

Mode. Calories will now be blinking, repeat the same process as above to set, then press

Mode. The Watt icon will be blinking. If you choose to set the Watts then the machine will

automatically adjust the workload to maintain continuous work. What this means is that if

you set the Watt to 100 the machine will try to keep you working at a rate of work that

equals 100 Watts (or working at a rate that will keep a 100 Watt light bulb burning). Watts

are determined by the amount of work you are doing. On the elliptical this means the speed

you are pedaling at combined with the workload of the machine. In Watt mode, if you

change your speed the machine will automatically change the workload to maintain the

same Watt level. If you pedal faster the workload will decrease and if you pedal slower the

workload increases.

After adjusting all the parameters, press Start to begin your workout.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Spirit ZE20 Elliptical Trainer 2004 in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Spirit ZE20 Elliptical Trainer 2004 Manual

Product: