584176
43
Zoom out
Zoom in
Previous page
1/45
Next page
XE100 / XE200 / XE300 Elliptical
42
SEE PAGE 30 FOR MORE INFORMATION ABOUT HEART RATE
Heart Rate Control Program 1 & 2 (HR 1, HR 2) operation
Both programs operate the same, the only difference is that HR 1 is set to 60% and HR 2 is set to
80% of maximum heart rate. They both are programmed the same way.
To start the HR 1 or HR 2 programs follow the instructions below or just press the HR 1 or HR 2
button then the Enter button and follow the directions in the message window.
27. Press the HR 1 or HR 2 key then press the Enter key.
28. The message window will ask you to enter your Age. You may enter your Age, using the Up
and Down keys or the numeric key pad, then press the Enter key to accept the new number
and proceed on to the next screen.
29. You are now asked to enter your Weight. You may adjust the Weight number using the Up
and Down keys or the numeric key pad, then press enter to continue.
30. Next is Time. You may adjust the Time and press enter to continue.
31. Now you are asked to adjust the Heart rate Level. This is the heart rate level you will
experience during the program. Adjust the level and then press enter.
32. Now you are finished editing the settings and can begin your workout by pressing the Start
key. You can also go back and modify your settings by pressing the Enter key. NOTE: At any
time during the editing of Data you can press the Stop key to go back one level, or screen.
33. If you want to increase or decrease the work load at any time during the program press the
Up or Down key. This will allow you to change your target heart rate at any time during the
program.
34. During the HR 1 or HR 2 programs you will be able to scroll through the data in the message
window by pressing the adjacent Display key.
35. When the program ends you may press Start to begin the same program again or Stop to exit
the program or you can save the program you just completed as a custom user program by
pressing a User key and following the instructions in the message window.
Auto-pilot
The Auto-pilot feature is a unique heart rate program. This program allows you to enter the Heart
Rate Control program on the fly. At any time, during any program, you can press the Auto-pilot
button and the console will switch to heart rate control mode. The console will maintain your heart
rate at the current level when you press the Auto-pilot button. For instance: If you are in the
Manual mode and your heart rate is at 150 beats per minute, pressing the Auto-pilot button will
switch the console to heart rate control and keep your heart rate at 150 beats per minute
automatically.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spirit XE200 2007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spirit XE200 2007 in the language / languages: English as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info