683476

SpinMaster Refill Blingy Banks Manual

1
Zoom out
Zoom in
Previous page
1/2
Next page
Instructions
Mode d’emploi
www.potterycool.com
WARNING:
CHOKING HAZARD
— Small parts.
Not for children under 3 years.
!
ATTENTION !
RISQUE
D'ÉTOUFFEMENT
— Contient de petits éléments.
Ne convient pas aux enfants de moins de 3 ans.
!
YEARS/ANS
6
+
Use with Pottery Cool™
STUDIO
À utiliser avec
l'ATELIER DE POTERIE
Pottery Cool™
(sold separately/
vendu séparément)
Blingy Banks
Tirelires
1. Insert the round core and matching sleeve into the turntable.
2. With your fingers press 1 clay disk around the sleeve.
3. Turn the machine to “||” (fast), spray with water and work the clay down to
the base.
4. When satisfied with your design turn machine to “0” (off), and use the knife
tool to trim excess clay from the bottom. (Store extra clay in a resealable
plastic bag to prevent clay from drying out).
5. To remove your project, remove turntable from machine and press down
onto work surface. Your project should lift off from the turntable.
6. Remove the plastic core and sleeve when clay is still wet to avoid cracking.
7. Add piggy details using excess clay and tools.
8. Make a coin slot in the top by cutting against the core/sleeve and remove
the clay.
9. Using excess clay cut a circle that is a bit larger than the bottom of your
design.
10. Use the tools to attach the circle to your design.
11. Completely dry overnight before painting.
PIGGY BANK
1. Insérer le moule rond et la gaine correspondante dans le plateau rotatif.
2. Placer un disque d'argile autour de la gaine en appuyant avec les doigts.
3. Placer l'interrupteur sur « || » (rapide), pulvériser l'argile avec de l'eau et
travailler l'argile vers le bas, jusqu'à la base.
4. Une fois la forme souhaitée obtenue, placer l'interrupteur sur « 0 » (OFF) et
utiliser le couteau pour enlever l'excédent d'argile au bas de la poterie
(conserver l'excédent d'argile dans un sac en plastique hermétique afin
d'éviter qu'elle ne se dessèche).
5. Pour détacher la poterie, retirer le plateau rotatif de la machine et l'appuyer
sur le plan de travail. La poterie devrait se détacher du plateau rotatif.
6. Retirer le moule et la gaine en plastique lorsque l'argile est encore humide
afin d'éviter les fissures.
7. Créer les détails du cochon à l'aide de l'excédent d'argile et des outils.
8. Créer une fente pour les pièces dans la partie supérieure en découpant et
en enlevant l'argile le long du moule/de la gaine.
9. Utiliser l'excédent d'argile pour découper un cercle légèrement plus grand
que la base de la poterie.
10. Attacher le cercle à la poterie à l'aide des outils.
11. Laisser sécher complètement jusqu'au lendemain avant de peindre.
TIRELIRE
Remarque : Toujours conserver l'excédent d'argile dans un
sac en plastique hermétique afin d'éviter qu'elle ne se
dessèche.
NOTE: Always store extra clay in a resealable plastic bag to
prevent clay from drying out.
1 2
3 4
5 6
7
9
8
10
8
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SpinMaster Refill Blingy Banks at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SpinMaster Refill Blingy Banks in the language / languages: English, French as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info