726848
24
Zoom out
Zoom in
Previous page
1/40
Next page
24
Programmable
Mixing
(Function Mode)
The DX3.0 offers two different mixing adjustments that allow for mixing one channel to another
channel. The mixes available are Steering-to-Auxiliary Channel Mixing and Throttle-to-Auxiliary
Channel Mixing. Each direction is independently adjustable. Popular use of this function
includes 4-wheel steering and independent front and rear wheel brakes.
For example, Throttle-to-Auxiliary channel mixing can be used for independent front and rear
wheel brakes. Each time the throttle/brakes is moved, the auxiliary channel will move in the
direction and to the value input being given by the throttle channel. Mixing is proportional, so
small inputs to the throttle will result in small output from the auxiliary
channel. The adjustment range is from -125% to 0% to 125%. If the rate is negative, the
channel is mixed in the opposite direction.
Both mixes share a single mixing “offset.” The purpose of the mixing offset is to redefine the
neutral position of the auxiliary channel, which can be set using Grip Lever A when
“LN” is selected in the Auxiliary Channel 3 function. If the “LN” selection is turned off in the
Auxiliary Channel 3 function with an offset value currently present, the value will
continue to act as a mixing offset until the value is either cleared or changed. If a mix is not
required, it is strongly suggested the mixing rate be set for 0%, which is the default.
Accessing the Mixing Adjustment Function
1. Turn the transmitter power switch on.
2. Press the SCROLL key to access Function mode.
3. Press the SCROLL key until “MIX” appears in the screen.
4. Press the CHANNEL key to select the desired mix to be used.
5. Move the steering wheel or trigger in the desired direction for adjustment (left/right,
forward/reverse or brake). Press the INCREASE or DECREASE key to achieve the
desired amount of mixing. Move the wheel or trigger in the opposite direction to adjust
the mixing in the opposite direction.
Note: For Auxiliary Channel 3 function, if LN is selected, only L/F is adjustable.
6. Press the SCROLL key to access the Lap Timer (if enabled) or Sub-Trim function.
7. To exit the Function mode, either turn the transmitter power switch off or press the
SCROLL and CHANNEL keys at the same time.
I0
M I X
THB
M I X
I0
STL
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Spektrum DX 3.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Spektrum DX 3.0 in the language / languages: English as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info