611437
1
Zoom out
Zoom in
Previous page
1/2
Next page
1. Laden Sie den Lautsprecher auf: Verbinden Sie ihn dafür über das Ladekabel mit einer USB-Stromquelle (500 mA). Der
Ladevorgang dauert ca. 1,5 Stunden. Beachten Sie bitte, dass der erste Ladevorgang etwas mehr Zeit beanspruchen kann.
Das Auaden ist während der Benutzung möglich.
2. Schalten Sie den Lautsprecher ein („ON“); die LED blinkt blau. Der Lautsprecher ist nun 10 Minuten bereit für das Pairing.
3. Stellen Sie über Ihr Smartphone oder Ihren Tablet-PC die Bluetooth 
®
-Verbindung zum Lautsprecher
(„SPEEDLINK HILO“) her. Dieser Vorgang unterscheidet sich je nach Gerät. Sollte eine Code-Eingabe verlangt werden,
geben Sie bitte die Zahlenkombination 0000 ein. Die LED blinkt anschließend konstant blau. Die Verbindung wird künftig
nach Aus- und Einschalten automatisch mit dem zuletzt verbundenen Gerät wiederhergestellt, wenn dies in Reichweite ist
(dieser Vorgang dauert ca. 5 Sekunden).
4. Stellen Sie die Lautstärke direkt an der Quelle ein.
5. Wird etwa 10 Minuten lang kein Tonsignal übertragen, schaltet sich der Lautsprecher in einen Stand-by-Modus. Sobald die
Leistung nachlässt oder ein Warnsignal ertönt, laden Sie den Lautsprecher bitte erneut auf. Bei Nichtgebrauch schalten Sie den
Lautsprecher einfach ab („OFF“), um Strom zu sparen.
Quick install Guide
1. Charge the speaker by connecting it to a USB power source (500mA) using the supplied charging cable. Charging takes around
1.5 hours during which time the rear LED will glow red. Please be aware that the initial charge may take a little longer. You can
use the device while charging it.
2. Switch the speaker ON – the LED will ash blue. The speaker will now be ready for pairing for 10 minutes before it turns off.
3. Pair your smartphone or tablet with the speaker (SPEEDLINK HILO) via Bluetooth 
®
. This process differs depending on your
device. If prompted, enter the code 0000. The LED then ashes solid blue. When you switch the speaker off and on again in
future, the connection to the last connected device will be restored automatically if it is within range
(This process takes approx. 5 seconds).
4. Adjust the volume on the audio source directly.
5. If no audio is transmitted for approximately 10 minutes, the speaker system will switch to stand-by mode. As soon as you notice
a drop in performance or if the speaker emits a warning signal, recharge the speaker. If you do not intend to use the speaker,
simply switch it OFF to save power.
TECHNICAL SUPPORT
Having technical problems with this product?
Get in touch with our Support team – the quickest way
is via our website: www.speedlink.com
© 2014 Jöllenbeck GmbH. All rights reserved. SPEEDLINK,
the SPEEDLINK word mark and the SPEEDLINK swoosh are
registered trademarks of Jöllenbeck GmbH. The Bluetooth
word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Jöllenbeck GmbH is under
license. All trademarks are the property of their respective owner.
Jöllenbeck GmbH shall not be made liable for any errors that may ap-
pear in this manual. Information contained herein is subject to change
without prior notice. Please keep this information for later reference.
JÖLLENBECK GmbH, Kreuzberg 2, 27404 Weertzen, GERMANY
sl-890000-Bk // Vers. 1.0
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Speedlink SL-890000 - HILO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Speedlink SL-890000 - HILO in the language / languages: English, German as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info