733469

Specialized FSR - 2015 Manual

22
Zoom out
Zoom in
Previous page
1/24
Next page
Page 20 of 20
Rear brake housing routing (internal)
1
C
A
D
B
2
Run the brake housing starting from the bottom (fig.1). Insert the housing into the port below the shock link
A
(fig.1), on the non-drive-side.
Continue running the housing into the frame until it exits at the head tube port
B
(fig.2).
Bolt the brake to the frame, then bolt the seatstay cable guide (S156500003)
C
to the seatstay (fig.1) to position the housing against the frame.
Trim the housing to the required length, attach the housing to the brake caliper and bleed the brake according to the manufacturer’s instructions.
Install the housing stop (S156500003)
D
in the same way as for the derailleur housing (P.19). Tighten the bolt (M4 x 13mm) just enough so that the
housing can’t move.
Rear brake housing routing (external)
1
A
B
C
D
2
The housing is attached to the side of the frame at four contact points (cable housing kit S156500003):
• Seatstay
A
: Attach the brake, then bolt the supplied cable guide (fig.1) to the seatstay to position the housing against the frame.
• Below shock link
B
: Using the Internal routing guide as a base, mount the external routing guide, then insert a longer bolt (M4 x 18mm).
• Forward shock eye bolt
C
: Place the supplied retainer loop over the housing (fig.1), then attach it to the frame by placing it on the forward
shock eye bolt. Tighten the forward shock eye bolt to 170 in-lbf (19.2 Nm).
• Down tube @ head tube
D
: Bolt the supplied cable guide (fig.2) to the frame to position the housing against the frame.
Trim the housing to the required length, attach the housing to the brake caliper and bleed the brake according to the manufacturer’s instructions.
Rear axle installation
1
A
2
B
3
C
Insert the axle (S150200001)
A
through the non-drive-side dropout (fig.1), hub and drive-side dropout. Make sure the axle head is aligned.
Install the derailleur guard (S159900013)
B
(fig.2), then tighten the derailleur guard bolt to tighten the axle. Torque to 30 in-lbf (3.4 Nm).
Tighten the two hanger bolts (S152600001)
C
(fig.3). Make sure the gaps between the dropout and the hanger are even. Torque to 55 in-lbf (6.2 Nm).
… 22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Specialized FSR - 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Specialized FSR - 2015 in the language / languages: English as an attachment in your email.

The manual is 14,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info