733841
7
Zoom out
Zoom in
Previous page
1/9
Next page
URD480 / English Instruction Manual
5
AUX-IN MODE
This unit provides an auxiliary audio signal input jack for connecting external audio devices.
Use an audio cable (not included) with one 3.5mm stereo plug on each end of the cable.
1. Plug one end into the “AUX-IN” jack (19) on the main unit and the other end of the cable into
the Line-Out jack or headphone jack of your external audio device.
2. Turn the unit on by pressing the “I / “ button (2) and choose the AUX mode by pressing the
FUNCTION” button (8).
3. The volume level can now be controlled through the main unit. Operate all other functions on
the auxiliary device as usual.
If the Line Out jack of your external device is connected, then you only need to adjust the
volume control of this system. If the headphone jack of your external device is connected,
then you may need to adjust both the volume control of your external device and the volume
control of this system to find the most desirable volume setting.
ALARM
Setting the Alarm
1. Set the unit in standby-mode and press the “ALARM” button (4) once.
2. The display will show “Select Alarm (1) 2”. Press the “ / ” button (10) to select alarm
setting of alarm 1 or 2.. To confirm press the “ALARM” button (4) again.
3. The display will show “Set Alarm (ON) OFF”. Press the “ / ” button (10) to select “ON”.
Press the “ALARM” button (4) again to confirm.
4. The hour digit of alarm time will flash. Press the / ” button (10) to select the alarm time
hour. Press “ALARM button (4).
5. The minute digit of alarm time will flash. Press the / ” button (10) to select the alarm
time minute. Press the “ALARM” button (4).
6. Alarm type will be shown on display. Press the / ” button (10) to select alarm mode by
Buzzer / CD / USB / DAB / FM. Press the “ALARM” button (4).
7. Volume level will be shown. Press the / ” button (10) to adjust the wake up level.
Press “ALARM” button (4).
8. The display will show “AL1” or “AL2” icon and keep in standby-mode
9. To turn off the alarm press the “ALARM” button (4) once. Then select alarm 1 or 2 and press
the “ALARM” button (4) again. Then select OFF at “Set Alarm ON (OFF)” and press the
“ALARM” button (4) again. Then press the “ALARM” button (4) until the end of the alarm
setting. The AL will disappear on the display.
Snooze
Press the “SNOOZEbutton (6) once to extend the alarm for 9 minutes every time and the AL
icon on the display will be flashing.
Setting Sleep-Timer
1. Press the “SLEEP” button (5) to enable the sleep function.
2. Keep pressing the button to adjust the sleep timer in the sequence:
10 / 20 / 30 / … / 90 minutes.
3. The system will stop and automatically go into standby-mode after the selected time has
passed.
4. To cancel the Sleep-Timer press the “SLEEP” button (5) until it reaches the “00” mode.
7


Need help? Post your question in this forum.

Forumrules
1

Forum

soundmaster-urd480we

Reset search

  • I cannot get the radio to work, I tried switching it off at the plug, when that didn't work I tried removing the plug from the wall and that didn’t work. There is no mention in the manual what to do. Submitted on 21-10-2022 at 09:41

    Reply Report abuse
  • The DAB function has stopped working, I cannot get a radio connection. What can I do as this isn’t in the Manuel. Submitted on 21-10-2022 at 09:36

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster URD480WE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster URD480WE in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Soundmaster URD480WE

Soundmaster URD480WE User Manual - English, German, Dutch, French, Italian, Norwegian - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info