Skip Mode
1. During play or pause mode, press the SKIP UP button to go to the next track.
2. During play or pause mod, press the SKIP DN button to go back to the previous track.
Different Play Mode
Press the MODE button to select different kinds of play mode with the following sequence.
For Audio CDs : Repeat 1 Repeat All Random Normal
For MP3 Files : Repeat 1 Repeat Folder Repeat All Random Normal
Repeat 1 – repeat the track being played.
Repeat All – repeat all the tracks in the storage media.
Repeat Folder – repeat the tracks in the entire folder.
Random – play the tracks in the storage media in random order selected by the player.
Normal – play the tracks in sequence.
Programming
In case of Playing Audio CD
The programming should be done during STOP mode
1. Press the PROGRAM button, the LCD display will show P01 and flash.
2. Use the SKIP UP or SKIP DN button to select the desired track.
3. Press the PROGRAM button again to store the selected track in the memory, the LCD
display will show P02 and flash continuously.
4. Repeat steps 2 to 3 to store more tracks in the memory. You can store up to 20 tracks
in the memory.
5. Press the PLAY/PAUSE button to start playing the disc in the programmed order.
6. To stop playing, press the STOP
button.
7. To cancel the programming list, press the STOP button and set the FUNCTION switch
to OFF position.
In case of Playing MP3 Files
All procedure is same as Audio CD. But if you have folders in your storage device, you can
select folder/album and track both. You can store up to 99 tracks in the memory.
Resume Function (continue from ended audio point)
Set the FUNCTION switch to STORY/AUX position. Then, the unit can memorise when the
music is stopped before switching to other function/switching off.
Set the FUNCTION switch to STORY/AUX position again. The music will continue from the
ended point.
Note:
If the AC power cord/USB device/Disc is removed, the memory will be lost.
- EN 5 -
