562196
3
Zoom out
Zoom in
Previous page
1/3
Next page
ENGLISH
ENG 2
AABC
Radio Operation
1. Switch the main power switch (19) to ON position
2. Slide the Function selector (2) to RADIO
3. Slide the Band selector (7) to a desired setting FM-ST/FM/AM
4. Rotate the Tuning control (9) to find the desired stations
5. When you finish listening, switch the main power switch (19) to OFF position
- FM operation:
Pull out the telescopic antenna. Incline and turn the antenna. Reduce its length if the signal is too strong.
- AM operation:
The item is provided with a built-in antenna. Direct the antenna by turning the whole set.
Cassette Operation
1. Switch the main power switch (19) to ON position
2. Slide the Function Selector (2) to TAPE
3. Press STOP/EJECT (5) to open the cassette door
4. Press PLAY (5) to start playback
5. To interrupt playback press || (5). To resume, press the key again
6. By pressing |<< or >>| on the set, fast winding of the tape is possible in both directions
7. To Stop the tape, press STOP/EJECT (5)
8. When you finish listening, switch the main power switch (19) to OFF position
Recording from the radio
1. Slide the Function Selector (2) to RADIO
2. Tune to the desired radio station
3. Insert a suitable cassette into the cassette deck
4. Press RECORD (5) to start recording
5. For brief interruptions, press PAUSE || (5). To resume press PAUSE again
6. To stop recording, press STOP/EJECT (5)
Tape deck maintenance
To ensure quality recording and playback of the tape deck, clean parts A, B and C shown in the diagram
beside, after approx. 50 hours of operation. Use a soft cloth slightly moistened with alcohol or a special
head cleaning fluid to clean the deck.
CD Operation
1. Switch the main power switch (19) to ON position
2. Slide the Function Selector (2) to CD
3. Open the CD door (6) and insert a CD/-R/-RW with the printed side facing up and close the CD door
4. Press PLAY/PAUSE on the set to start playback
5. Press >>| (11) once briefly for the next track, or press repeatedly until the desired track number appears in the display
6. Press |<< (11) once briefly to return to the beginning of a current track
7. Press |<< (11) more than once briefly for a previous track
8. To pause playback press PLAY/PAUSE (13) again
9. To stop CD playback, press STOP (12)
10. When you finish listening, switch the main power switch (19) to OFF position
CD repeat
Press 1x REPEAT (14) to repeat the current track
Press 2x REPEAT (14) to repeat all tracks
Press 3x REPEAT (14) to cancel the function
Programming CD track numbers
1. In Stop mode press PROG (10), display shows „PROG“
2. Press |<< >>| (11) for select your desired track
3. When your chosen track number appears, press PROG (10) once to store the track. The display shows prog and prog briefly
followed by your selected track number
4. Repeat steps 2 and 3 to select and store all desired tracks in this way
5. To play your program, press PLAY/PAUSE (13) button
6. To erase a program, press twice STOP (12) button
Copyright by Woerlein GmbH, 90556 Cadolzburg, www.woerlein.com
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster SCD 5401 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster SCD 5401 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Soundmaster SCD 5401

Soundmaster SCD 5401 User Manual - German - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info