562173
9
Zoom out
Zoom in
Previous page
1/11
Next page
E-8
z PLAY EJECTION
PRESS THE EJECT BUTTON (16) ANYTIME DURING PLAYBACK WILL RETURN THE TONE ARM TO THE REST
POSITION IMMEDIATELY.
Remark :
- DUE TO THE LENGTH OF THE RECORD IS VARIOUS, IF YOU FIND THE TONE ARM CANNOT
RETURN AUTOMATICALLY AFTER PLAYBACK OF RECORD. PLEASE PRESS THE EJECT
BUTTON AND RETURN THE TONE ARM BACK TO THE REST POSITION
- USERS SHOULD NOT CHANGE TO A MAGNETIC CARDRIDGE S
YSTEM, OTHERWISE UNIT
CAN´T BE CONNECTED ANYMORE TO AN AUX-IN OF MUSIC-CENTER
ADJUSTMENTS
ANTI-SKATING CONTROL
- SET THE ANTI-SKATING CONTROL (29) TO THE POSITION WHICH CORRESPONDING TO THE ADJUSTED
STYLUS WORKING PRESSURE. IF THE WORKING PRESSURE IS 2 GRAMS, THE ANTI-SKATING
CONTROL ALSO TO BE SET AT 2.
PLATTER SPEED ALIGNMENT
- DURING PLAYBACK OF RECORD, OBSERVE THE APPROPIATE STRIP OF
STOBE CALIBRATION DOTS
FROM THE STROBE LENS. THE UPPER ONE IS FOR 33 RPM AND THE MIDDLE ONE IS FOR 45 RPM.
- IF THE STROBE DOTS APPEAR TO FLOWING TO THE RIGHT, IT MEANS THE PLATTER IS REVOLVING
SLOWER THEN RATED SPEED. TURN THE PITCH CONTROL (33) TO THE +
DIRECTION. IF THE
STROBE DOTS APPEAR TO FLOWING TO THE LEFT, IT MEANS THE PLATTER IS REVOLVING FASTER
THAN RATED SPEED. TURN THE PITCH CONTROL (33) TO THE DIRECTION.
- ADJUST THE PITCH CONTROL (33) UNTIL THE STROBE DOTS DO APPEAR TO BE STATIONARY WITHOUT
MOVING LEFT OR RIGHT.
TONE ARM STOPPING POSITION ALIGNMENT
- THE POSITION OF THE TONE ARM COMPLETE PLAYBACK AND RETURN TO THE REST STATION CAN BE
ADJUSTED AT THE ALIGNMENT SCREW (27) AS FOLLOW:-
- BEFORE STARTING THE ALIGNMENT, PLEASE TAKE OUT THE HOLE COVERING RUBBER:-
A)
IF THE SYSTEM CANNOT COMPLETE THE PLAYBACK OF RECORD AND RETURN EARLIER
1) USE A CROSS HEAD SCREW DRIVER AND TURNING THE ALIGNMENT SCREW (34) INSIDE THE HOLE
CLOCKWISE, THE STOPPING AND EJECT POSITION OF THE TONE ARM WILL MOVE MORE INWARD TO THE
CENTER OF THE RECORD BEFORE PLAYBACK COMPLETION.
B) IF THE SYSTEM CANNOT RETURN TO REST
POSITION AUTOMATICALLY AFTER PLAYBACK OF RECORD
2) USE A CROSS HEAD SCREW DRIVER AND TURNING THE ALIGNMENT SCREW (34) INSIDE THE HOLE
ANTI-CLOCKWISE, THE STOPPING AND EJECT POSITION OF THE TONE ARM WILL MOVE MORE AWAY FROM
THE CENTER OF THE RECORD BEFORE PLAYBACK COMPLETION.
REMARK:-
- THE STOPPING POSITION IS VERY SUBJECTIVE AMONG DIFFERENCE CUSTOMERS, PLEASE SELECT
THE MOST SUITABLE POSITION BASED ON YOUR OWN RECORD COLLECTION. THE EX-FACTORY
SETTING IS BASED ON THE MOST COMMON TEMPLATE.
- PLEASE CHECK THE STOPPING POSITION TIME BY TIME DURING ADJUSTMENT AND AVOID OVER
TURNING OF
THE SCREW INSIDE.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster PL875USBv2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster PL875USBv2 in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Soundmaster PL875USBv2

Soundmaster PL875USBv2 User Manual - German - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info