642508
8
Zoom out
Zoom in
Previous page
1/11
Next page
MCD5500 / English Instruction Manual
6
Playback of MP3 song via USB storage media or memory card
Connecting
The system is able to decode and playback all MP3 file which stored in the memory media with USB
connecting port or SD/MMC memory card.
1. Set the system at standby mode first or other function except SD or USB mode.
2. Plug-in the USB pen-drive with the face up & make sure it going into completely or insert the memory
card in the direction of the arrow as shown in the label on the underside of the memory card slot. Insert
straight without bending.
Connecting the USB upside down or backwards could damage the audio system or the storage media (USB thumb
drive / SD/MMC card). Check to be sure the direction is correct before connection.
3. Set Function button (10) to SD/MMC card or USB mode.
4. The system will start reading the storage media automatically after connecting, and LCD display (2) will show the total
number of MP3 files being detected.
5. Repeat the same playback procedure and programming as playing CD disc as above.
Remark
- The system can detect and read the file under MP3 format only at USB/SD mode but not other music file format.
- If connect the system to MP3 player via the USB socket, due to variances in MP3 encoding format, some MP3 player
may not be able to play via the USB socket. This is not a malfunction of the system.
- USB port does not support connection with USB extension cable and is not designed for communication with
computer directly
Removing of USB / memory card
To remove the USB / memory card, turn off the power or switch the function mode to either CD, aux or tuner first. For USB port
un-plug it by pulling out the USB socket directly, for memory card pull out the SD/MMC card straightly without bending.
Encoding into MP3 file
The system is able to encode normal CD/Tuner/Phono or cassette tape file to MP3 format and recording at memory media with
USB connecting port or SD/MMC card and below explanation was encode to USB port and same procedure if encode to
SD/MMC card. The system will create a music folder name RIPfor CD-DA encode, REC for Tuner, Aux, Cassette encode
and FROMCD for CD-MP3 disc copy and encode bitrate default at 128kbps.
A) CD encoding
I) encoding 1 track / 1 disc at 1x speed
1. Perform normal playback of the CD track you want to encode & record,
2. Press “ button (4) during the playback of the desire track and the display will show REC and USB flashing.
3. Press “ button (4) again the display will show REC and ONE flashing.
4. Press “ button (4) again, the system will flashing with REC USB icon. Encoding is performing now.
5. After completing of recording, unit will stop playback automatically.
6. Press “ stop “ button (3) to interrupt the recording mode anytime.
7. For encode whole CD track, pls stay CD in stop mode then press button (4) three times until the display
flashing REC USB, then system will start to playback CD and encoding whole disc.
Remark:-
- The recording speed is 1:1 and according to the actual plying time of the CD track
- The recording format is preset at MP3 bit rate : 128 kbps, sampling rate : 44.1khz
- Press “ stop “ button (3) to interrupt the recording mode at anytime.
B) Copying of MP3 file
If putting a MP3 disc instead of a CD-disc, the system will copy the files to the USB if press the button (4). The
operation procedures is same as CD encoding as stipulate on above, and the system will switch to copying mode only if MP3 file
being read.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster MCD5500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster MCD5500 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Soundmaster MCD5500

Soundmaster MCD5500 User Manual - English, German - 79 pages

Soundmaster MCD5500 User Manual - German - 11 pages

Soundmaster MCD5500 User Manual - Dutch - 79 pages

Soundmaster MCD5500 User Manual - Dutch - 11 pages

Soundmaster MCD5500 User Manual - French, Italian, Norwegian - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info