562113
8
Zoom out
Zoom in
Previous page
1/10
Next page
MCD4850 / English instruction manual
ENG 7
IV) ERASE OR UNFINALIZE A CD-RW DISC
It is possible to erase the last recorded track or erase a whole record disc (CD-RW only)
a) ERASE ONE TRACK
1. Set the function mode at “ CD-2” and place the CD-RW disc you would like to delete the file.
2. Press the “ Erase “ button (32) at CD stop mode & wait until “ bUSY “ disappear on the LCD (2)
3. Press the “ play/pause ” button (24) to start erasing the last track.
4. Repeat step 2 and 3 to continuous the erasing.
5. Press the stop ” button to quite erase mode if necessary
b) ERASE ALL TRACK
1. Set the function mode at “ CD-2” and place the CD-RW disc you would like to delete the file.
2. Press and hold the “ Erase “ button (32) at CD stop mode & wait until “ erase all appear on the LCD (2)
3. Press the “ play/pause ” button (24) to start erasing..
4.
The LCD (2) will show “ 0000000 “ to confirm the erase process is completed
.
REMARK :
- This operation cannot be undo.
- The copy CD-RW disc from other system cannot be erased one by one in this unit but may be erase all
is possible.
LISTING TO TAPE
GENERAL OPERATION
Cassette playback : The system will start the playback automatically after inserting
of cassette tape. Press the tape button(16) to select tape function.
Stop and ejection : Press the “ Tape Forward / Eject “ button (34) completely inwards
and the cassette tape will be ejected though the Cassette Door Cover (35).
The “ Tape Forward / Eject “ button (34) will keeping at lowest height position.
Fast forward : Press the “ Tape Forward / Eject “ button (34) half inwards during
Playback mode, the tape winding forward direction. The Tape Forward /
Eject “ button (34) will keeping at middle height position.
Slightly press the “ Tape Forward / Eject “ button (34) again to resume normal
playback. The Tape Forward / Eject button (34) will resume to the highest
position
.
REMARK
- Make sure the direction is correct when inserting the tape into the system.
- There is some searching noise can be heard and the system cannot perform normal playback function
during fast forward mode.
-
This is recommended to take out the cassette tape from the system every times after listening and
don’t leave the cassette tape inside the system when not under playback mode
.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster MCD4850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster MCD4850 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Soundmaster MCD4850

Soundmaster MCD4850 User Manual - German - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info