562073
2
Zoom out
Zoom in
Previous page
1/7
Next page
DISC4020 / English Manual
ENG 2
Setting the clock
1. Set unit in standby mode.
2. Press & hold the “ Mem/Clk-Adj ” button (17), display will flash “24HR” press the Skip Up or Skip Down button
(16) to select the clock format between 12 or 24Hour. Then press the “ Mem/Clk-Adj ” button (17).
3. The first digit of “ 0:00 ” is flashing on the LCD display (1). Press Skip Up
or Skip Down button (16) to set the
correct hour. Press “ Mem/Clk-Adj ” button (17) to store the correct hour.
4. The third & fourth digit of “ 00 ” is flashing, press the Skip Up or Skip Down button (16) to set the correct minutes.
Then press “ Mem/Clk-Adj ” button (17) to store the correct minute.
¾ The clock setting mode will automatically quit if no button is being pressed in a period of about 5 seconds after
pressing the “ Mem/Clk-Adj ” button.
¾ The pre-set time will be re-set completely if dis-connecting the main power supply. You are
recommended to switch the system into standby mode for convenience usage.
Listening to radio
Manual tuning
1. Switch on the unit by On/Standby button (12), then press Function button (13) to select “ Tuner ” mode.
2. Tune to the required station by pressing the Tuning Up or Down button (16).
3. Press the Volume knob (11) to the desired volume level.
Auto tuning
1. Press Function button (13) to select “ Tuner ” mode.
2. Press and hold the Tuning Up or Down button (16) for 1-2 seconds and then release.
3. The unit will start seeking automatically and stop until a radio station is reached.
4. Repeat step 2 & 3 until the desired radio station is being reached.
5. Press Volume knob (11) to the desired volume level.
Preset stations
You can store up to 10 radio stations in the memory
Set to tuner mode.
1. Turn to the desired radio station by “ Manual” or “ Auto ” tuning method.
2. Press and hold the Mem/Clk-Adj ” button (17) until the “ MEM ” indicator and preset station number are flash on LCD display
(1)
3. Press “ Folder / Pre-up
button (15) to select the desired station memory for storage.
4. Press “ Mem/Clk-Adj ” button (17) again to confirm the setting.
5. Repeat step 1 to 4 to store other stations.
6. Now you can select the presets stations in order by pressing the “Folder/Pre–up
” button (17)
¾ The pre-set memories will be cancelled completely if dis-connecting the main power supply. You are recommended to
switch the system into standby mode for convenience usage.
¾ There are 5 seconds for program state, after 5 sec. This state would resume to normal tuner mode automatically.
¾ You can overwrite a present station by storing another frequency in its place.
FM-Stereo reception
z Press the “ St/Mono ” button (9) repeatedly, the FM programs are receiving in mono and stereo mode repeatedly. In
particular when stereo signals are weak, it is preferable to receive the program in Mono.
z If stereo signal is being received, the stereo indicator “ ” will appear on LCD display (1) to show FM Stereo program
is now receiving.
Hints for best reception:-
- FM : the receiver has a build-in FM wire antenna (19) hanging at the rear cabinet, this wire should be totally unraveled and
extended for the best reception.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundmaster DISC4020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundmaster DISC4020 in the language / languages: English as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Soundmaster DISC4020

Soundmaster DISC4020 User Manual - German - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info