611464
131
Zoom out
Zoom in
Previous page
1/135
Next page
User Manual
13: DMX
DMX
13: DMX
A set of four Layers is saved with every console Snapshot. In the Edit Cue Menu (section 9.2.1) a Fade
Time settting is available to determine how long a lighting transition takes from one Cue to another, and
Cue Type can be set to Audio And DMX, Audio Only, or DMX Only.
DMX Masters and DMX ‘Slaves’ (Channels) are available seperately in the Isolate parameter list (see 9.1).
FaderGlow White is used for DMX Control faders (Note - white is also used for linked Mono Input
Channels).
With an appropriate Control Channel selected (SEL button), the OUTPUTS & DMX Touch Screen Menu will
allow you to rename a DMX Channel (‘DMX Channel Name’) or Master (‘DMX Master Name’) .
DMX 512 Addresses
Each Layer of DMX Chanel faders are hard patched to the corresponding DMX Channel numbers, with the
Mono/SEL fader used as the DMX Master for that Layer.
In other words:
- Si Performer 1 has 14 faders on each layer (4 x 1-14), hard-patched to DMX channels 1-14, plus a Master
Fader for each Layer(DMX Masters A-D).
- Si Performer 2 has 22 faders on each layer (4 x 1-22), hard-patched to DMX channels 1-22, plus a Master
Fader for each Layer (DMX Masters A-D).
- Si Performer 3 has 30 faders on each layer (4 x 1-30), hard-patched to DMX channels 1-30, plus a Master
Fader for each Layer (DMX Masters A-D)
DMX Output
The Console’s Physical DMX Output is a standard Female XLR-5 connector on the rear panel.
The console’s single DMX output for each channel is determined by the highest value for any one channel
across the four layers - calculated by multiplying the channel fader level by the DMX Master level.
To explain, if Fader 1 on Layer A was at 50% and DMX Master A was at 50%, then the DMX Channel 1
output from Layer A would be 25% (50% of 50%). If Fader 1 on Layer B was at 50% and DMX Master B
was at 100% and, then the DMX Channel 1 output from Layer B would be 50% (100% of 50%). Of the two,
Layer B has the highest output (50% versus 25%), so that would take precedence and would be the
console’s DMX Channel 1 output value.
ALT + FADER LAYER BUTTON
Select a DMX Fader Layer.
Hold the ALT button and press a FADER button A-D to choose a DMX Fader Layer. The Mono/Sel Control Channel
will be the DMX master for that layer..
131


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Si Performer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Si Performer in the language / languages: English as an attachment in your email.

The manual is 5,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info