611475
29
Zoom out
Zoom in
Previous page
1/32
Next page
29
8 - TB LEVEL8 - TB LEVEL
8 - TB LEVEL8 - TB LEVEL
8 - TB LEVEL
A balanced input is provided for a Talkback microphone. The signal may be routed
selectively to Aux 1/2 or 3/4 (which might typically be used for performers’ foldback) or
Mix L/R by pressing the appropriate switches. The signal level is adjusted by the TB LEVEL
control.
9 - S9 - S
9 - S9 - S
9 - S
TERETERE
TERETERE
TERE
O RETURNSO RETURNS
O RETURNSO RETURNS
O RETURNS
Two balanced Stereo Returns are available for the outputs of effects units and are mixed
directly to the Mix L/R busses at a level set by the RET-1 or RET-2 controls. If a mono
source is used, plugging into the Left jack only automatically feeds to the signal to both
Left and Right.
11
11
1
0 - 2TK LEVEL0 - 2TK LEVEL
0 - 2TK LEVEL0 - 2TK LEVEL
0 - 2TK LEVEL
The rotary control sets the level of the 2 Track Tape input, which is routed to the headphones,
monitor outputs and meters, or directly to the Mix outputs by pressing the adjacent switch
(12). These unbalanced inputs, on RCA phono connectors, are ideal to connect the
playback of a tape machine for monitoring.
11
11
1
1 - 2TK REPLA1 - 2TK REPLA
1 - 2TK REPLA1 - 2TK REPLA
1 - 2TK REPLA
CES MIX OUTPUT!CES MIX OUTPUT!
CES MIX OUTPUT!CES MIX OUTPUT!
CES MIX OUTPUT!
This switch does what it says! When pressed the Mix output is switched to the 2 Track
input and is an ideal way of feeding pre-show music to the main outputs in live applications
without using up valuable input channels. For example, with the switch pressed and a CD
connected and playing pre-show music, the engineer can be setting up channel levels,
adjusting EQ, talking back to performers and monitoring any part of the mix (including
final Mix) without affecting the sound to the audience. Releasing the switch instantly
swaps the Mix Outputs back to the mixer and cuts off the CD.
CAUTION: Pressing this switch cuts off the
normal Mix L/R signal and it should therefore NOT
be used during live performance or recording
11
11
1
2 - MONIT2 - MONIT
2 - MONIT2 - MONIT
2 - MONIT
OR SOUROR SOUR
OR SOUROR SOUR
OR SOUR
CE SELECE SELE
CE SELECE SELE
CE SELE
CTCT
CTCT
CT
These switches allow a choice of 2TK, C (mono), Mix or Groups as the source for the
Phones, Monitor outputs and meters, and may be selected individually or as a combination.
NOTE: If NO switches are pressed, there will be NO signal on the meters or monitors!
11
11
1
3 - MONIT3 - MONIT
3 - MONIT3 - MONIT
3 - MONIT
OR + PHONESOR + PHONES
OR + PHONESOR + PHONES
OR + PHONES
This control sets the output level to the MONITOR LEFT & RIGHT outputs. If Headphones
are plugged into the PHONES jack the Monitor outputs are cut off, and the knob then sets
the headphone listening level. When the PHONES are unplugged the Monitor output is
restored. The source for the Monitor and Phones is selected by the five switches (13)
above the control.
When any PFL or AFL switch is pressed the source for the Monitor outputs and Headphones
is switched to the mono PFL/AFL signal without interrupting the other outputs from the
mixer, to allow individual signals to be monitored. The original monitor source is restored
when the PFL/AFL switches are released.
11
11
1
4 - PFL/AFL4 - PFL/AFL
4 - PFL/AFL4 - PFL/AFL
4 - PFL/AFL
The PFL/AFL LED illuminates to show that a PFL/AFL is active and is the source for the
monitors and meters. The LED will normally be OFF
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft LX 7ii at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft LX 7ii in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Soundcraft LX 7ii

Soundcraft LX 7ii User Manual - German - 32 pages

Soundcraft LX 7ii User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info