611477

Soundcraft Compact Stagebox Manual

5
Zoom out
Zoom in
Previous page
1/16
Next page
Soundcraft Compact Stagebox User/Installation Guide Page 5
IMPORTANT SAFETY WARNINGS
THIS UNIT MUST BE EARTHED!
Under no circumstances should the mains earth be disconnected from the mains lead.
The wires in the mains lead are coloured in accordance with the following code:
Earth: Green and Yellow (Green/Yellow - US)
Neutral: Blue (White - US)
Live: Brown (Black - US)
As the colours of the wires in the mains lead may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
• The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is
marked with the letter E or by the earth symbol.
• The wire which is coloured Blue must be connected to the terminal in the plug which is marked with
the letter N.
• The wire which is coloured Brown must be connected to the terminal in the plug which is marked
with the letter L.
Ensure that these colour codings are followed carefully in the event of the plug being changed.
The internal power supply unit contains no user serviceable parts. Refer all servicing to a
qualied service engineer, through the appropriate Soundcraft dealer.
ELECTROSTATIC DISCHARGE (ESD)
Many semiconductor components are sensitive to electrostatic discharge (ESD). The lifespan of
assemblies contain ing such components can be drastically reduced by improper handling
during maintenance and repair. Please observe the following rules when handling ESD sensi-
tive components:
• ESD sensitive components should only be stored and transported in the packing material speci-
cally provided for this purpose.
• When performing a repair by replacing complete assemblies, the removed assembly must be sent
back to the supplier in the same packing material in which the replacement assembly was shipped.
If this should not be the case, any claim for a possible refund will be null and void.
• Unpacked ESD sensitive components should only be handled in ESD protected areas (EPA, e.g.
area for eld service, repair or service bench) and only be touched by persons wearing a wristlet
connected to the ground potential of the repair or service bench by a series resistor. The equipment
to be repaired or serviced as well as all tools and electrically semi-conducting work, storage, and
oor mats should also be connected to this ground potential.
• The terminals of ESD sensitive components must not come in uncontrolled contact with electro-
statically chargeable or metallic surfaces (voltage puncture, discharge shock hazard).
• To prevent the components from undened transient stress and possible damage due to inadmis-
sible voltages or compensation currents, electrical connections should only be established or sepa-
rated when the equipment is switched off and after any capacitor charges have decayed.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Soundcraft Compact Stagebox at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Soundcraft Compact Stagebox in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info