812372
22
Zoom out
Zoom in
Previous page
1/24
Next page
Example: displayed collector temperature 40°C, read previous temperature 39°C, displayed storage temperature 30°C, read return tem-
perature 31° means a setting of -20% (displayed ∆T 10K, actual ∆T 8K => -20% correction value)
The heat quantity data in the “Constant flow” mode only consists of calculated values for the functional inspection of the system.
Starting aid
For some solar systems, in particular for vacuum tube collectors, the measurement recording on the collector sensors may be too slow or
imprecise, because the sensor is often not on the warmest spot. With an activated starting aid, the following procedure occurs: If the tem-
perature on the collector sensor increases within a minute by the value defined under “increase”, the solar circulation pump will be turned on
for the set “purging time” so that the medium to be measured is transported to the collector sensor. If there is still no normal switching con-
dition through this, there will be a 5 minute block time for the start wizard function.
This function should only be activated by a technician if problems occur with the measurement recording. Observe in particular
the instructions from the collector manufacturer.
The menus "Purging time" and "Increase" are only displayed when the starting aid function is set to "On".
Purging time
If the temperature on the collector sensor increases within a minute by the value defined under “increase”, the solar circulation pump will be
turned on for the set “purging time” so that the medium to be measured is transported to the collector sensor. If the set ΔT is not reached, a 5-
minute circulation pause time for the starting aid function will apply.
Increase
If the temperature at the collector reaches within a minute the value defined, the solar pump is turned on for the duration of the purging time.
Daylight saving time
If this function is activated, the controller automatically changes to winter time or summer time (DST, Daylight Savings Time).
8. Menu Lock
Secure the controller against unintentional changing and compromise of basic func-
tions.
Menu lock active = "On"
Menu lock off = "Off"
In addition, the "Simple" menu view can be used to hide menu items that are not neces-
sary for the daily use of the controller after commissioning. The menu item "Menu lock
on/off" is also hidden when the "Simple" menu view is selected!
The menus listed below remain completely accessible despite the menu lock being
activated, and can be used to make adjustments if necessary:
1. Measurement values
2. Statistics
4. Settings
6. Special Functions
7. Menu lock
9. Language
9. Service Values
Serve for remote diagnosis by a specialist or the manufacturer in the event of errors,
etc.
Enter the values into the table when an error occurs.
22
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel STDC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel STDC in the language / languages: English as an attachment in your email.

The manual is 2.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel STDC

Sorel STDC User Manual - German - 26 pages

Sorel STDC User Manual - Dutch - 48 pages

Sorel STDC User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info