812401
1
Zoom out
Zoom in
Previous page
1/2
Next page
Room Sensor Clima T2A
Digital room temperature and humidity sensor with communication via 1-Wire bus in connection with the °CALEONbox Clima.
Technical Data
Power Supply 5 VDC SELV or PELV
Measurement Range 0 °C ... 60 °C / 0 % ... 100 %
Accuracy +/- 1 °C / +/- 6 % | Resolution 0.1 °C / 0.1 %
Protection Class IP 20
Max. Cable Length up to 100 m powered (three-wire connection recommended),
using twisted pair cables
Dimension 55 mm x 55 mm
Housing Design plastic housing pure white
Installation Methods Surface / flush-mounted
Wall Installation
Mount the Room Sensor Clima T2A in a suitable place.
Caution!
Device and function may be damaged. Select a suitable environmental condition. Direct sunlight,
sources of heat and cold, e.g. radiators and windows must be avoided.
Mounting in flush-mounted switch box
Attach the mounting ring to the switch box with the arrow pointing upwards (2). Make the electrical connection as
described below.
Attach insert
Hold the cover frame (1 - not included in the scope of delivery, Art. No.: 82001) against the mounting ring (2). Align the
Room Sensor Clima T2A (3) to fit the mounting ring and push it on.
Surface mounting
Use the surface-mounted frame set for surface mounting Art. No.: 82002.
Electrical Connection
For the connection of a Room Sensor Clima T2A, one of the terminal points VDD/ DQ/ GND is required in each case.
The additional three clamping points are for easy connection of further sensors.
Only to be used with SELV or PELV protective extra-low voltage.
If shielded cables are used, contact between the shielding and the PCB can cause damage to the device
and lead to malfunctions.
Type Plate and Sticker with 1-Wire ID
Each Room Sensor has a unique 16-digit 1-Wire ID. This ID is required for sensor-room assignment in °CALEON. The
ID can be found inside the sensor on the type plate and on the supplied sticker. We recommend placing the sticker in
the table of the °CALEONbox Clima operating instructions or in the °CALEONbox Clima terminal plan sticker to simplify
the later configuration of the system.
SOREL GmbH Mikroelektronik | Reme-Str. 12 | D - 58300 Wetter (Ruhr) | +49 (0)2335 682 77 0 | info@sorel.de | www.sorel.de | 28.08.2023
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sorel Room Sensor Clima 1-Wire T2A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sorel Room Sensor Clima 1-Wire T2A in the language / languages: English as an attachment in your email.

The manual is 1.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sorel Room Sensor Clima 1-Wire T2A

Sorel Room Sensor Clima 1-Wire T2A User Manual - German - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info