164181
1
Zoom out
Zoom in
Previous page
1/4
Next page
Sony Corporation 1996 Printed in Japan
XM-5026/4026
Technische Daten
Besondere Merkmale
Nennleistung von 50 (40)* Watt pro Kanal (an 4
Ohm, Versorgungsspannung 12,5 V).
Nennleistung von 75 (55)* Watt pro Kanal (an 4
Ohm, Versorgungsspannung 14,4 V).
Der XM-5026/4026 kann als monauraler
Verstärker mit einer maximalen
Ausgangsleistung von 440 (320)* Watt an 4
Ohm (bei Verwendung als in einer
Brückenschaltung) eingesetzt werden.
Dual Mode-Verbindung ermöglicht ein System
mit mehreren Lautsprechern.
Schutzschaltung mitgeliefert.
Pulsgeregeltes Storomversorgungsteil** für
stabile, geregelte Ausgangsleistung.
Neuartiger Schaltkreis eliminiert den
Quellenwiderstand der MOS FET-Endstufe und
spricht den Lautsprecher direkt an.
* (XM-4026)
** Pulsgeregelte Stromversorgung
Die Stromversorgung erfolgt bei diesem Verstärker über ein
pulsgeregeltes Stromversorgungsteil, das die 12-V-
Gleichspannung der Autobatterie mit einem
Halbleiterschalter in Impulse hoher Frequenz zerhackt,
dann mit einem Transformator hochtransformiert, in einen
positiven und einen negativen Pfad aufteilt und schließlich
wieder in Gleichspannung zurückwandelt. Die Vorteile
dieses Stromversorgungsteils: Stabile, von Schwankungen
der Autobatteriespannung unabhängige
Ausgangsspannung, geringe Impedanz und geringes
Gewicht.
Funzioni
Uscita di alimentazione nominale di 50 (40)*
watt per canale (a 4 ohm, tensione di
alimentazione di 12,5 V).
Uscite di alimentazione nominale di 75 (55)*
watt per canale (a 4 ohm, tensione di
alimentazione di 14,4 V).
XM-5026/4026 può essere utilizzato come un
amplificatore mono con uscite di massimo 440
(320)* watt a 4 ohm (quando utilizzato come
amplificatore ponte).
Doppio modo di collegamento per un sistema
con più altoparlanti.
Fornito con circuito di protezione.
Alimentazione a impulsi** per potenza di uscita
stabile e regolare.
Nuovo circuito che rimuove la resistenza
sorgente dallo stadio di uscita finale MOS FET e
dirige i diffusori direttamente.
* (XM-4026)
** Alimentazione a impulsi
Questo apparecchio dispone di un convertitore incorporato
che converte l’alimentazione da una batteria d’auto da 12 V
CC in segnali ad alta velocità tramite l’impiego di un
interruttore a semiconduttore. Questi segnali sono elevati
dal trasformatore a impulsi incorporato e separati in
alimentazione positiva e negativa prima di essere convertiti
di nuovo in corrente continua. Questo serve a regolare la
tensione altrimenti variabile della batteria dell’auto.
Il sistema di alimentazione leggero offre alimentazione ad
alta efficienza con un’uscita a bassa impedenza.
3-858-867-21 (1)
Stereo power
Amplifier
Bedienungsanleitung
Istruzioni per l‘uso
Diese Anleitung behandelt die Modelle XM-5026 und XM-4026. Die
Abbildungen in der Anleitung zeigen das Modell XM-5026. Auf eventuelle
Unterschiede zwischen den Modellen wird deutlich im Text hingewiesen.
Questo manuale di istruzioni copre i modelli XM-5026 e XM-4026. Le
illustrazioni nel manuale sono dello XM-5026. Eventuali differenze sono
chiaramente indicate nelle sezioni corrispondenti.
Schaltungsauslegung
OTL (Output Transformerless,
transformatorloser Ausgang),
pulsgeregeltes
Stromversorgungsteil
Eingänge RCA-Stiftbuchsen
Ausgänge Lautsprecherklemmen
Lautsprecherimpedanz
1 – 8 Ohm (Stereo)
2 – 8 Ohm (bei Brückenschaltung)
Maximale Ausgangsleistung
150 (110)* Watt pro Kanal (an 4
Ohm)
220 (160)* Watt pro Kanal (an 2
Ohm)
440 (320)* Watt (monaural) an 4
Ohm
Nennleistung (Versorgungsspannung 12,5 V)
50 (40)* Watt pro Kanal (20 Hz –
20 kHz, 0,04 % gesamte
harmonische Verzerrung, an 4
Ohm)
75 (60)* Watt pro Kanal (20 Hz –
20 kHz, 0,1 % gesamte
harmonische Verzerrung, an 2
Ohm)
75 (65)* Watt pro Kanal (20 Hz –
20 kHz, 0,1 % gesamte
harmonische Verzerrung, an 1
Ohm)
150 (120)* Watt (monaural) (20 Hz
– 20 kHz, 0,1 % gesamte
harmonische Verzerrung, an 4
Ohm)
Nennleistung (Versorgungsspannung 14,4 V)
75 (55)* Watt pro Kanal (20 Hz –
20 kHz, 0,04 % gesamte
harmonische Verzerrung, an 4
Ohm)
110 (80)* Watt pro Kanal (20 Hz –-
20 kHz, 0,1 % gesamte
harmonische Verzerrung, an 2
Ohm)
110 (85)* Watt pro Kanal (20 Hz –
20 kHz, 0,1 % gesamte
harmonische Verzerrung, an 1
Ohm)
220 (160)* Watt (monaural) (20 Hz
– 20 kHz, 0,1 % gesamte
harmonische Verzerrung, an 4
Ohm)
Frequenzgang 5 Hz – 100 kHz (
-3 dB)
Klirrgrad 0,005% oder weniger
(bei 1 kHz, 4 Ohm)
Eingangsempfindlichkeit-Einstellbereich
0,2 – 4,0 V
Hochpaßfilter 80 Hz, –12 dB/oct
Tiefpaßfilter 50 Hz, 80 Hz, –18 dB/oct
Verstärkung der niedrigen Frequenzen (nur XM-5026)
0 – 10 dB (40 Hz)
Stromversorgung 12 V Gleichspannung
(Autobatterie mit negativer
Erdung)
Erlaubter Spannungsbereich
10,5 – 16 V
Stromaufnahme bei Nennausgangsleistung:
18 (13)
A
Steuereingang: 1 mA
Abmessungen ca. 181 × 62 × 360 (280)
mm (B/
H/T), einschießlich
Kontaktschutzabdeckung
Gewicht ca. 2,2 (1,6)
kg, ausschl. Zubehör
Mitgeliefertes Zubehör
Montageschrauben (4)
Kontaktschutzabdeckung (2)
Sonderzubehör Anschlußkabel für Endverstärker
RC-46
RCA-Kabel RC-64 (2 m)
RCA-Kabel RC-65 (5 m)
(XM-4026)
Änderungen, die dem technischen Fortschritt dienen,
bleiben vorbehalten.
+0
Caratteristiche tecniche
Sistema circuito Circuito OTL (uscita senza
trasformatore)
Alimentazione a impulsi
Ingressi Prese a terminale RCA
Uscite Terminali diffusori
Impedenza diffusori 1 – 8 ohm (stereo)
2 – 8 ohm (quando usato come
amplificatore ponte)
Uscite massime 150 (110)* watt per canale (a 4
ohm)
220 (160)* watt per canale (a 2
ohm)
440 (320)* watt (mono) a 4 ohm
Uscite nominali (tensione di alimentazione di 12,5 V)
50 (40)* watt per canale (20 Hz –
20 kHz, 0,04 % THD, a 4 ohm)
75 (60)* watt per canale (20 Hz –
20 kHz, 0,1 % THD, a 2 ohm)
75 (65)* watt per canale (20 Hz –
20 kHz, 0,1 % THD, a 1 ohm)
150 (120)* watt (mono) (20 Hz –
20 kHz, 0,1 % THD, a 4 ohm)
Uscite nominali (tensione di alimentazione di 14,4 V)
75 (55)* watt per canale (20 Hz –
20 kHz, 0,04 % THD, a 4 ohm)
110 (80)* watt per canale (20 Hz
– 20 kHz, 0,1 % THD, a 2 ohm)
110 (85)* watt per canale (20 Hz
– 20 kHz, 0,1 % THD, a 1 ohm)
220 (160)* watt (mono) (20 Hz –
20 kHz, 0,1 % THD, a 4 ohm)
+0
Risposta in frequenza
5 Hz – 100 kHz (
-3 dB)
Distorsione armonica 0,005% o meno (a 1 kHz,
4 ohm)
Gamma di regolazione livello in ingresso
0,2 – 4,0 V
Filtro passalto 80 Hz, –12 dB/oct
Filtro passabasso 50 Hz, 80 Hz, – 18 dB/ott
Amplificazione dei bassi (solo per XM-5026)
0 – 10 dB (40 Hz)
Alimentazione Batteria d’auto da 12 V CC (massa
negativa)
Tensione alimentazione
10,5 – 16 V
Consumo corrente a uscita nominale: 18 (13)
A
Ingresso comando a distanza:
1 mA
Dimensioni Circa 181 × 62 × 360 (280)* mm
(l/a/p), incluso il coperchio de
protezione
Massa Circa 2,2 (1,6)
kg, esclusi
accessori
Accessori in dotazione
Viti di montaggio (4)
Coperchio di protezione (2)
Accessori opzionali Cavo di collegamento per
amplificatore di potenza RC-46
Cavo a terminali RCA RC-64
(2 m)
Cavo a terminali RCA RC-65
(5 m)
(XM-4026)
Il design e le caratteristiche tecniche sono soggetti a
modifiche senza preavviso.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony xm 5026 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony xm 5026 in the language / languages: German, Italian as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony xm 5026

Sony xm 5026 User Manual - English, French - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info