21389
31
Zoom out
Zoom in
Previous page
1/124
Next page
31
Seven Basic Operations — Getting to Know Your DVD Recorder
2. Recording a Programme
This section introduces the basic operation to
record the current TV programme to the hard disk
(HDD) or to a disc (DVD). For an explanation of
how to make timer recordings, see page 48.
1 Press HDD or DVD.
When you record to a DVD, insert a
recordable DVD (see “Inserting a Disc” on
page 29).
2 Press PROG +/– to select the programme
position or input source you want to
record.
3 Press REC MODE repeatedly to select the
recording mode.
Each time you press the button, the display on
the TV screen changes as follows:
For more details about the recording mode,
see page 48.
4 Press z REC.
Recording starts.
Recording stops automatically after 8 hours of
continuous recording or when the HDD or
DVD is full.
To stop recording
Press x REC STOP located beneath the remote
control cover.
Note that it may take a few seconds for recorder to
stop recording.
To pause recording
Press X REC PAUSE located beneath the remote
control cover.
To restart recording, press the button again.
To watch another TV programme while
recording
If your TV is connected to the LINE 1 – TV jack,
set your TV to the TV input using the t TV/
DVD button and select the programme you want
to watch. If your TV is connected to the LINE
OUT or COMPONENT VIDEO OUT jacks, set
the TV to TV input using the t TV/DVD button
(page 22).
TV Direct Rec
If you use the SMARTLINK connection, you can
easily record what you are watching on your TV.
When the TV is turned on or in standby mode,
press
z REC. The recorder automatically turns on
and starts recording what you are watching on the
TV.
z Hint
If you do not want to watch TV while recording, you can
turn off the TV.
b Notes
If “TV” appears in the front panel display, you cannot
turn off the TV or change the programme position
during TV Direct Rec. To turn off the function, set “TV
Direct Rec” to “Off” in “Features” setup (page 99).
After pressing
z REC, it may take a short while to
start recording.
You cannot change the recording mode while
recording or during recording pause.
If there is a power failure, the programme you are
recording may be erased.
To use the TV Direct Rec function, you must first set
the recorder’s clock correctly.
+
RW
-
RWVR
-
RW
Video
-
R
+
R
HDD
123
456
789
0
PROG +/–
REC MODE
HDD
DVD
x REC STOP
z REC
t TV/DVD
X REC PAUSE
DISPLAY
HQ SPHSP
LSP
SEP EPSLP
LP
,continued
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony RDRHXD710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony RDRHXD710 in the language / languages: English as an attachment in your email.

The manual is 2,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info