21411
24
Zoom out
Zoom in
Previous page
1/110
Next page
RDR-GXD500
2-188-393-11(1)
24
D:\DVD
manual\Final\218839311_FM\01GB04BAS.fm
master page=left
10Press ENTER.
The Setup Display for selecting the type of
video signal output from the LINE 1-TV jack
appears.
11Select the type of signal you want to output
from the LINE1-TV jack.
“Video”: Outputs video signals.
“S Video”: Outputs S video signals.
“RGB”: Outputs RGB signals.
Note that if you select “On” in step 9, you
cannot select “RGB.”
If you select “S Video” or “RGB,”
SMARTLINK will be deactivated.
12Press ENTER.
The Setup Display for selecting the type of
jack used to connect to your amplifier
(receiver) appears.
13Select the type of jack (if any) you are
using to connect to an amplifier (receiver),
and press ENTER.
If you did not connect an AV amplifier
(receiver), select “No,” then go to step 16.
If you connected an AV amplifier (receiver)
using just an audio cord, select “Yes: LINE 2
OUT (R-AUDIO-L),” then go to step 17.
If you connected an AV amplifier (receiver)
using either a digital optical or coaxial cord,
select “Yes: DIGITAL OUT.”
14Select the type of Dolby Digital signal you
wish to send to your amplifier (receiver).
If your AV amplifier (receiver) has a Dolby
Digital decoder, select “Dolby Digital.”
Otherwise, select “D-PCM.”
15Press ENTER.
The Setup Display for the DTS signal appears.
16Select whether or not you wish to send a
DTS signal to your amplifier (receiver),
and press ENTER.
If your AV amplifier (receiver) has a DTS
decoder, select “On.” Otherwise, select “Off.”
17Press ENTER when “Finish” appears.
Easy Setup is finished. All connections and
setup operations are complete.
To return to the previous step
Press O RETURN.
z Hints
If your AV amplifier (receiver) has an MPEG audio
decoder, set “MPEG” to “MPEG” (page 86).
If you want to run Easy Setup again, select “Easy
Setup” in the Setup Display (page 90).
EASY SETUP Line1 Output 4/5
Select the Line1 output signal.
Video
S Video
RGB
EASY SETUP Audio Connection 5/5
Is this recorder connected to an amplifier (receiver)?
Select the type of jack you are using.
Yes :
LINE2 OUT(R-AUDIO-L)
Yes :
DIGITAL OUT
No
Audio Connection 5/5
Dolby Digital
D-PCM
Dolby Digital
EASY SETUP
Audio Connection 5/5
DTS
On
Off
EASY SETUP
EASY SETUP
Easy Setup is finished.
Finish
01GB01.book Page 24 Mardi, 7. septembre 2004 9:41 09
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony RDR-GXD500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony RDR-GXD500 in the language / languages: English as an attachment in your email.

The manual is 8,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info