63401
28
Zoom out
Zoom in
Previous page
1/29
Next page
28
GB
KDL-32U2000
2-693-044-11(0)
Picture noise when viewing a
TV channel
Select “Manual Programme Preset” in the “Set-Up” menu and adjust “AFT”
(Automatic Fine Tuning) to obtain better picture reception (page 21).
Some tiny black points and/or
bright points on the screen
The picture of a display unit is composed of pixels. Tiny black points and/or
bright points (pixels) on the screen do not indicate a malfunction.
No colour on programmes
Select “Reset” in the “Picture Adjustment” menu to return to the factory
settings (page 17).
No colour or irregular colour
when viewing a signal from the
Y, P
B/CB, PR/CR jacks of 3
Check the connection of the Y, PB/CB, PR/CR jacks of 3.
Make sure that the Y, P
B/CB, PR/CR jacks of 3 are firmly seated in their
respective sockets.
Irregular picture when viewing
a signal from PC
Check PC input socket connection.
Connect to PC input socket instead of HDMI IN 6, 7 socket.
If the connection is only available through HDMI socket, change the screen
resolution to 720p and adjust horizontal and vertical screen size in the
display properties settings of PC.
Sound
Problem Cause/Remedy
No sound, but good picture
•Press 2 +/– or % (Mute).
Check that “TV Speakers” is set to “On” in the “Sound Adjustment” menu
(page 18).
Noisy sound
See the “Picture noise” causes/remedies on page 27.
Channels
Problem Cause/Remedy
The desired channel cannot be
selected
Switch between digital and analogue mode and select the desired digital/
analogue channel.
Some channels are blank
Scrambled/Subscription only channel. Subscribe to the Pay Per View
service.
Channel is used only for data (no picture or sound).
Contact the broadcaster for transmission details.
Digital channel is not displayed
Check that the aerial is plugged directly into the TV (not through other
equipment).
Contact a local installer to find out if digital transmissions are provided in
your area.
Upgrade to a higher gain aerial.
General
Problem Cause/Remedy
The TV turns off automatically
(the TV enters standby mode)
Check if the “Sleep Timer” is activated, or confirm the setting of “Off
Time” (page 20).
If no signal is received and no operation is performed in the TV mode for
10 minutes, the TV automatically switches to standby mode.
The TV turns on automatically
Check if the “On Time” is activated (page 20).
Some input sources cannot be
selected
Select “AV Preset” in the “Set-up” menu and cancel “Skip” of the input
source (page 20).
The remote does not function
Replace the batteries.
Problem Cause/Remedy
010COV.book Page 28 Thursday, January 25, 2007 10:34 AM
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony KDL-26P2530 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony KDL-26P2530 in the language / languages: English as an attachment in your email.

The manual is 6,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony KDL-26P2530

Sony KDL-26P2530 User Manual - German, Dutch, French, Italian - 109 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info