703475
30
Zoom out
Zoom in
Previous page
1/32
Next page
30
3 Operating instructions
4 Cleaning and maintenance
1. Plug into any 220 V AC, 50 Hz source.
2. Place the heater on the floor at least 1 metre away from the wall and any other objects
such as furniture, curtains or plants.
3. Set the on/off switch to ON. The appliance is now on standby.
4. Press the + symbol to start the appliance. The appliance will start in cool fan mode
with the pilot light for the fan illuminated.
5. Press the + symbol again to increase the output power. The corresponding pilot light
will then illuminate. Once the room reaches a comfortable temperature, press the -
symbol to select a lower setting to reduce your electricity consumption and to prevent
the room from becoming too warm.
6. If you need to switch off the appliance, press the - symbol until all the pilot lights go out.
7. If the appliance will not be used for a long time, please set the on/off switch to OFF
8. The heater head can be manually adjusted to a comfortable position. The angle can be
adjusted by up to 50°. Do not touch the safety grill to avoid burns.
• Your heater is equipped with a safety device with a thermal cut-off that switches off the
heater in the event of overheating or malfunction. It will reset while the temperature
reduces to a normal level.
• If overheating or malfunctions continue, return the heater to an approved service agent
for examination.
• The most common cause of overheating is deposits of dust or fluff entering the heater.
Ensure these deposits are removed regularly by unplugging the unit and vacuuming the
air vents and front grill.
• Light accumulations of dust can be removed from the heater with a soft cloth. Wipe the
exterior surfaces of the heater occasionally with a cloth moistened (not dripping wet)
in a solution of mild detergent and water. Dry the housing thoroughly with a soft dry
cloth before operating the heater.
• The fan motor is lubricated in the factory and will require no further lubrication.
• No other user maintenance is required or recommended. If servicing is required, send
your heater to the nearest authorised service centre.
GB
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sonnenkonig DUBLIN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sonnenkonig DUBLIN in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info