771646
3
Zoom out
Zoom in
Previous page
1/6
Next page
Selecting 12 or 24 hours format -
Press and hold the Fast Button (9) for 6 seconds to enter the hour selection mode,
release the Fast Button (9) when the display shows "12 H" or "24 H".
Press the FAST button (9) to toggle between 12 or 24 hours format. If no selection is
made within 4 seconds, then the last displayed hour format will be chosen and the display
will return to the normal Time mode.
Alarm -
Enable Alarms:
1) To enable Alarm 1, slide the ALARM MODE SWITCH (4) to AL1 position. the alarm
indicator AL1 (2) will light up.
2) To enable Alarm 2, slide the ALARM MODE SWITCH (4) to AL2 position, the alarm
indicator AL2 (3) will light up.
3) To enable both alarms, slide the ALARM MODE SWITCH (12) to AL1+AL2 position,
the alarm indicators AL1 (2) and AL2 (3) will light up.
Shutting Off the Alarm -
Alarm can be shut off temporary for the day or permanently shut off.
1) When alarm goes off, press the ALARM OFF (5) button to turn off for the day. The alarm will
repeat at the same time the next day, if alarm setting has not been changed.
2) To shut the alarm off permanently, slide the Alarm Function Switch (11) down to the
OFF position.
NOTE: The Alarm Off function of Alarm 1 and Alarm 2 is independent of each other.
To Select Wake up mode -
To select the wake up mode, slide the Alarm Function Switch (11) to your desired position: -
a) BUZZ for sound (Alarm Sound is user selectable)
b) VIB for bed shaker
c) VIB/ BUZZ for both sound and bed shaker
NOTE: once the wake up mode is chosen, this will apply to both alarms.
To Select Alarm Sound
To select the alarm sound, slide the Alarm Sound Selector (12) to your desired setting.
The user can select between, two built-in sounds, the standard buzzer sounds, as well as
their own recordings.
Recordings
To make your recording, press and hold the Record (19) button 1 sec, then make your own
recording. (10 sec)
To playback your recording, press the Play (19) button.
Alarm Patterns -
When the alarm is activated, alarm pattern of the buzzer / flashing display will be out of
sync with the vibrator. This means that when the buzzer / flashing display is ON, the vibrator will
be OFF and while the buzzer/ flashing display is OFF, the vibrator will be ON.
ALARM 1 - When Alarm 1 is active, the buzzer will beep 3 times, then the vibrator will be on.
This pattern is repeated until the alarm is stopped.
ALARM 2 - When Alarm 2 is active, the buzzer will beep 4 times, then the vibrator will be on.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sonic Alert SBW100 Sonic Boom at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sonic Alert SBW100 Sonic Boom in the language / languages: English as an attachment in your email.

The manual is 0.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info