568059
2
Zoom out
Zoom in
Previous page
1/2
Next page
12
11
7
4
5
6
3
2
1
INSTRUCTIONS
ANALOG ALARM CLOCK WITH BED VIBRATOR
MODEL SBA475SS
Features shown on diagrams above:
1) Function Switch 7) Battery Compartment
2) Back light Hi/Lo Dimmer 8) Time Set Knob
3) Snooze Button 9) Alarm Set Knob
4) Volume Control 10) Back light On/Off
5) Flashing Light Display 11) AC Power Input
6) Tone Control 12) Vibrator Input
AC-9V Power Input -
Attach the AC power supply input to the back of clock at AC-9V IN (11) next to the VIBRATOR
input, smaller input of the two.
NOTE: IMPORTANT: do not confuse"AC POWER INPUT"(11) with the "VIBRATOR INPUT"(12)
Setting the correct time-
1) Turn the Time Set Knob (8) clockwise until hour and minute hands show desired time.
Setting the alarm time-
1) Turn the Alarm Knob (9) clockwise until alarm hand is at the desired time.
Alarm-
To enable the alarm function, slide the "FUNCTION SWITCH" (1) up to the position that you desire
to wake to, you can choose "VIB" for bed shaker, "BUZZ" for sound, and "VIB/BUZZ" for both.
NOTE: whichever function you choose to wake to, will be the same function for both alarms. When
the alarm sounds, the Flashing Light Display (4) and the back light will flash until the alarm
is stopped.
Snooze Operation-
SNOOZE button (3) - press after alarm has sounded. The alarm will be turned off for 4 minutes for
extra sleep. The alarm will come back again after 4 minutes.
Shutting Off Alarm-
Alarm can be shut off by sliding the function switch (1) to off position.
Volume Control-
To adjust the "VOLUME", turn the volume wheel (4) located on right side of the clock.
Tone Control-
To adjust the "TONE", turn the tone wheel (6) located on right side of the clock to the desired tone
sound.
Bed Shaker / Vibrator- Figure B
1) Attach the bed shaker jack to the side of clock at VIBRATOR input (12).
2) To turn on vibrator slide FUNCTION switch (1) to VIB or VIB/BUZZ position.
3) Place vibrator under mattress or pillow.
Night Light -
The blue back light can be turned on or off by using switch (10) located at the back of the clock.
When the light is turned off, by pressing the Snooze button (3) will turn on the back light.
The brightness of the back light can be adjusted by using the dimmer switch (2) at the side of the
clock.
Battery Backup-
To use battery backup, you can install a 1.5-volt AA size alkaline battery at the bottom of the clock
located under the battery cover (7). Note the back light, vibrator and sound will not operate during
power failure, your alarm and time setting will be saved when power is restored.
10
9
8
Figure B
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sonic Alert SBA 475 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sonic Alert SBA 475 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sonic Alert SBA 475

Sonic Alert SBA 475 User Manual - German - 4 pages

Sonic Alert SBA 475 User Manual - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info