568083
4
Zoom out
Zoom in
Previous page
1/6
Next page
English from PO#22955 SB200ss-v3 093-HK093-027 27-03-2013
Adjusting The Snooze Time
The default snooze time setting is 9 minutes but you may adjust the snooze time between 1
minute and 30 minutes as desired. To adjust the snooze time:
• Press and hold the SNOOZE Button (9) for four seconds. The clock display will show the
default snooze time 9. Release the snooze button
Press the SLOW“ Button (7) to adjust the snooze time to the desired setting, from 1 minute
to 30 minutes.
When the display is showing the desired snooze time, after 3 seconds it will return to the normal
clock mode. The new snooze time setting becomes the new default and remains in the memory
until you change it again.
Shutting Off the Alarm
Alarm can be shut off temporary for the day or permanently shut off.
1) When alarm goes off, press the ALARM OFF (4) button to turn off for the day and come back
on at the same time the next day, if alarm settings have not changed.
2) To shut the alarm off permanently, slide the “ Alarm Mode Switch“ (11) down to the OFF
position. The alarm will not come on until the “ Alarm Mode Switch“ (11) is set to VIB/BUZZ,
VIB, or BUZZ position.
NOTE: The Alarm Off function of Alarm 1 and Alarm 2 is independent of each other.
Dimmer Operation
There is a 5-level brightness control for the LED display. Press the SNOOZE button (9) once to
change the display brightness. The brightness will cycle from 5-4-3-2-1-2-3-4-5 (from bright to dim
then from dim to bright).
*NOTE*: The dimmer function will not work, when the clock is in snooze mode.
Volume Control
1) To adjust the volume, rotate VOLUME wheel (13) located on the lower right corner of the clock.
Tone Control
1) To adjust the TONE, turn the TONE wheel (10) located on the top right corner of the clock.
Bed Shaker / Vibrator See Figure B
1) Attach the bed shaker jack to the back of clock at VIBRATOR INPUT (15).
2) To turn on vibrator, slide Alarm Mode Switch (2) to VIB/BUZZ or VIB position.
3) Place vibrator between mattress and box spring.
Battery Backup
To use the battery backup, you can install a 9-volt alkaline battery in the back of the clock located under
the Battery Compartment Cover (16). The battery needs to be purchased separately. Note the LED
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sonic Alert SB200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sonic Alert SB200 in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sonic Alert SB200

Sonic Alert SB200 User Manual - German - 3 pages

Sonic Alert SB200 User Manual - French - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info