771708
1
Zoom out
Zoom in
Previous page
1/2
Next page
DELUXE REMOTE RECEIVER
MODEL SA201
OPERATION
The Deluxe Remote Receiver SA201, will alert you by flashing
a light when a signal is transmitted from a Sonic Alert
Transmitter (Telephone Ring Signalers, Baby Cry Signaler or
Doorbell Signaler). A signal from one or all of the transmitters
will be received by the SA201 and in turn will flash a light
which is plugged into the SA201 cord. The SA201 will have a
different sequence of flashing depending of which transmitter is
being activated. The SA201 can also be used for room lighting
by pushing the button on the SA201. The green light will
indicate if the lamp is in the “on” or “off” position.
INSTALLATION
1. Plug a lamp into the outlet on the cord of the SA201 as
shown in the diagram on the reverse side. Make sure the
switch on the lamp is in the "ON" position or the lamp will
not flash when the telephone rings.
2. Plug the SA201 Remote Receiver into any standard
electrical outlet.
3. From this point on, only use the button on the SA201 to turn
the lamp on and off. Pressing the button once will turn the
lamp ON. Pressing the button again will turn the lamp OFF. A
green light under the button will come on whenever the lamp
should be on. If the green light is on and the lamp is not on, the
lamp is either turned off or the light bulb is burned out. If you
turn the switch on the lamp to the “OFF” position, the lamp
will not flash when the SA201 is activated.
4. If the lamp plugged into the SA201 is “on,” it will flash “off”
when the telephone rings. If the lamp is in the “off” position,
it will flash "on" when activated.
DELUXE REMOTE RECEIVER
MODEL SA201
OPERATION
The Deluxe Remote Receiver SA201, will alert you by flashing
a light when a signal is transmitted from a Sonic Alert
Transmitter (Telephone Ring Signalers, Baby Cry Signaler or
Doorbell Signaler). A signal from one or all of the transmitters
will be received by the SA201 and in turn will flash a light
which is plugged into the SA201 cord. The SA201 will have a
different sequence of flashing depending of which transmitter is
being activated. The SA201 can also be used for room lighting
by pushing the button on the SA201. The green light will
indicate if the lamp is in the on or off position.
INSTALLATION
1. Plug a lamp into the outlet on the cord of the SA201 as
shown in the diagram on the reverse side. Make sure the
switch on the lamp is in the "ON" position or the lamp will
not flash when the telephone rings.
2. Plug the SA201 Remote Receiver into any standard
electrical outlet.
3. From this point on, only use the button on the SA201 to turn
the lamp on and off. Pressing the button once will turn the
lamp ON. Pressing the button again will turn the lamp OFF. A
green light under the button will come on whenever the lamp
should be on. If the green light is on and the lamp is not on, the
lamp is either turned off or the light bulb is burned out. If you
turn the switch on the lamp to the “OFF” position, the lamp
will not flash when the SA201 is activated.
4. If the lamp plugged into the SA201 is “on,” it will flash “off”
when the telephone rings. If the lamp is in the “off” position,
it will flash "on" when activated.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sonic Alert SA201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sonic Alert SA201 in the language / languages: English as an attachment in your email.

The manual is 0.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info