The HomeAware Vibe is a new accessory that connects to the
HomeAware main unit, transmitters, and receivers. This
personal pager will alert you to events like the smoke/CO
detector, the baby crying, the phone ringing and many more.
The HomeAware Vibe will alert you with multiple colored LED
lights, vibration and an audio alert, all patterned to a specific
alert. Simply clip the HomeAware Vibe to your waistband or slip
it into a pocket and enjoy the freedom of never missing an alert
again. In fact the HA360VB1.2 can also act as an emergency
alert notification device in case you have fallen or have another
emergency you need help with. By simply pushing the PAGE
button on the front of the unit it will send an alert notification to
all your HomeAware receivers and the main unit. Because it is
portable and the increased range due to the HomeAware’s mesh
network, you will be safe throughout your house and out.
HA360VB2.1 Features
•Emergency alert button when help is needed. Ultra-high
brightness strobe for maximum visibility.
•Clips easily on waistband and small enough to slip into a
pocket.
•Connects to the HomeAware main unit, transmitters, and
receivers.
•Alert patterns unique to you, vibrate, sound, flashing lights, or
different colors for different alerts.
Battery Features
Note: After you have received your HomeAware Vibe, please
fully chargebefore first use. A complete charge will take
approximately 3 hours.
•Green – charge complete
•1 Red light – battery low
•2 Red Lights – Battery half charged
If the Vibe is switched toOff the battery indicators lights will not
be lit but the Vibe is still charging.
Low Battery Check
The Vibe will alert you when the battery is getting low.
Depending on what switch or switches that are on, it will be a
single yellow blink, vibration orbeep.
TO LINKTHE HOMEAWARE VIBE WITH THE HA360MVSB
Linking:
•Press SET UP button on the main unit and the word LINK will
be shown on the display, press ENTER. LINK will begin
blinking.
•Press and hold down the PAGE button on the front of Vibe,
PICKDEVICEwill be shown on displayof the main unit. Press
the blue MINUTE/down arrow button until the display reads
HELP, then press ENTER. DONEwill be shown on the display
when linking is completed.
Switch / Page Button Controls
There are several ways that the Vibe can be set to notifyyou of
alerts happening in or around your home. Pick one, two or all four
with a flip of a switch.
•V - Vibrate
•S - Sound
•F - Flash
•C – Color
−Door - Green
−Baby – Blue
−Phone – Orange
−Smoke/CO – Red
−Cyan – Universal
•Low Battery – Single Yellow blinking light
•Lost Link – Double Yellow blinking light
PAGE Button / Emergency Help
When the PAGE button on the front of the HomeAware Vibe is held
down for 3 seconds, it sends a HELPalert to the main unit.
If the Vibe and the Main Unit have lost connection, it will need to
be reset
•Push all switches to the off position except for theOn/Off power
switch leave in the on position.
•Press and hold the PAGE button, the LED light will be amoving
purple.
•Reset is completed when the LED light is a solid orange.
The Vibe is now ready to be linked to the Main Unit.
HA360VB2.1 – Quick Start Guide
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Sonic Alert HA360VB 2.1 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Sonic Alert HA360VB 2.1 in the language / languages: English as an attachment in your email.
The manual is 0.2 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.